|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
ec300 jetting
I have a new 2009 ec 300 with stock jetting and I'm wondering what jetting would anyone recommend for 2150 feet altitude. Down the road I might get a JD carb kit but for now I'll just use my brass from home. Where should I start? Needle, main, or pilot? Any input would be appreciated.
|
#3
|
|||
|
|||
Slide 7
needle N1EF clip top position pilot 40 main 178 This is what's in the bike now from factory. |
#4
|
||||
|
||||
i changed mine to 2nd clip from bottom i ride from 200 metres to 2000 metres and this works fine with standard factory needle and jet
|
#5
|
|||
|
|||
Just got a JD Jet kit today, I'll play with that for now. I can see this will be a trial and error arguous process, I thought there would be some pilots and some sort of jetting chart with the kit, guess not. But I should have it dialed in in a couple of rides so that's good news.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New to me 04 ec300...jetting help | 04gasgas | Enduro Intake/Carburetion - 2 stroke | 10 | 02-12-2011 05:08 PM |
ec300 jetting | moff747 | Enduro Intake/Carburetion - 2 stroke | 8 | 01-08-2008 03:21 PM |
What is it with Jetting - 2004 EC300 | bigkatuna | Enduro Intake/Carburetion - 2 stroke | 9 | 11-28-2007 10:28 AM |
LTR jetting kit for an '03 EC300 | WoodsRider | Enduro Intake/Carburetion - 2 stroke | 1 | 05-24-2007 10:09 AM |
04 EC300 jetting? | DWreck | Enduro Intake/Carburetion - 2 stroke | 13 | 11-26-2006 08:12 PM |