|
Enduro Product Reviews Feedback & Comments on Products Tested |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
MotoSeat Covers Available for 12s and 13s
We've been working with the folks at MotoSeat to come up with attractive and durable covers for the 2012 and 2013 Gassers. My knee braces had chewed at the left side of the stock cover, so it was time for something different.
The first one arrived today and I'm impressed by its appearance and construction. We'll have them available in multi-color (as shown) or basic black, with three panel construction for multis or a single cut for black. Gripper material is tough and grippy, although regular vinyl can be substituted on the top or sides if desired. The stitching exhibits the smallest amount of waviness, but its still alot straighter than I can ride. The logo is placed to allow for seat mounting from the top or bottom. There is no bunching or sagging - I was assured that would be the case because of the bias of the material. The red gripper on the sides is pretty close in color to the GasGas upper shroud plastic in 2012, but may look even better when contrasted against the white in 2013. Another option would be to swap the black top and red sides. The covers are $55 delivered anywhere in the Continental US, or slightly more to international addresses. PM me to order.
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters Last edited by twowheels; 03-27-2013 at 10:42 PM. Reason: details |
#2
|
|||
|
|||
Will there be enough material to cover a tall seat foam?
|
#3
|
||||
|
||||
We could get you an untrimmed cover, but at this point they haven't been tested with tall foam.
PlusOnePerformance
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters |
#4
|
||||
|
||||
WOW!!! The seat cover turned out really nice! Looks great!
I just need to get mine installed. I went all black gripped.
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#5
|
||||
|
||||
I like the snow in the background. Wish we had some. Just rain, rain & more rain. If it ain't raining then it's just plain wet! Nice seat covers, will keep you in mind.
|
#6
|
||||
|
||||
Quote:
Gripper covers are good in the rain
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters |
#7
|
||||
|
||||
I long for the days of A/C, its been low teens/single digits here for a week, lake is a foot thick ice by my yard.
Looks nice Steve. I think the '12/'13 seats are particularly vulnerable to cover wear due to the way they overlap the plastic and expose the edge, rather than meet it flush. The tougher the cover the better here. |
#8
|
|||
|
|||
Thats a great deal.
|
#9
|
||||
|
||||
Here is a few of my all black gripper cover.
If a guy wants to add some bling you could order it black with red pleats or vise a versa......In my case yellow pleats.
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#10
|
|||
|
|||
cant see any gg covers on their website. do they do covers for the 2010's?
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why do oversized PV covers do what they do? | motogroove | Enduro Engine - 2 stroke | 100 | 10-22-2014 10:43 PM |
Engine covers | Pepperami | Enduro Engine - 2 stroke | 4 | 05-25-2012 11:38 AM |
Powervale Covers | Bearman | Enduro Intake/Carburetion - 2 stroke | 4 | 10-06-2008 02:57 AM |
seat covers... | infected | Enduro Chassis & Body | 0 | 01-08-2008 08:46 AM |