|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Quote:
It sounds strange for me - every former bike works well with this procedure. I had the same problem with air bubbles. My solution needs longer but works also. 1. Fit a 20cm long tube at the nipple. 2. I hang up the rear caliper and pump 1/2 h without closing/open the bleeder nipple. 3. Don't forget the new fluid. I see many air bubbles, then the system was clean. Now I have only 1 cm play in the lever.
__________________
Husqvarna TE 300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brake and Clutch master cap crossover | Leo | Enduro Chassis & Body | 2 | 02-10-2010 01:56 PM |
Rear brake clevis | Fred1956 | Enduro Chassis & Body | 12 | 01-24-2010 02:51 AM |
Rear brake master cylinder crossover? | bergerhag | Enduro Chassis & Body | 5 | 04-09-2009 09:26 AM |
Anyone no if any other MX bikes that have the same rear brake hose as my 2001 ec300 | GasGas.ec300.Andy | Enduro Chassis & Body | 3 | 02-28-2009 07:11 PM |