Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #38  
Old 10-07-2008, 11:01 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default

You can buy a kit for $30.

Or you can get a syringe from the cooking section of Walmart.

First thing I do is blow out the bad juice as normal, down. Filling the reservoir as needed.

When the fluid coming out is clean, then I reverse the process. I suck out the fluid in the reservoir using a (um, turkey baster). Then I safety wire a flexy tube on the syringe and place the tube on the nipple. The real flexible silicone tubing is best. I fill the syringe with DOT4 fluid, attach it to the nipple, and pump it up the system. You'll possibly see that there might be a lot of micro bubbles that regular bleeding will miss. Do that until the bubbles stop. Button everything up and test the system.

BTW, I did 40 miles of some really rocky hill climbs (shallow, but long). I noticed the clutch slipping (was it getting hot?) in the middle of long climbs. I'll take it apart tomorrow to see if everything is all right.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Does your clutch drag? stay_upright Enduro Engine - 2 stroke 11 06-05-2008 03:14 AM
Clutch Drag? Gas Huffer Enduro Engine - 2 stroke 5 12-11-2007 05:02 AM
05' EC300 Clutch Drag gasIdaho Enduro Engine - 2 stroke 18 09-09-2006 02:53 PM




All times are GMT -5. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org