|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
10,000' Ec300
Any suggestions for 9500+ feet, 75 degree average? I have a DDK and CCK for needles. MJ + PJ would be appreciated.
__________________
04 Montesa 315R, 07 EC300, 21 KTM Erzberg 300, 21 Sherco 300 SEF-F, 23 KTM 690, 23 Rieju Mr Pro 300 |
#2
|
||||
|
||||
Thats way out of my scope. I'd suggest talking to Les @ LTR if no one else has proven specs. You can also work with the JD jetting spreadsheet, quite a handy tool. I would think that you are going to need needles with a leaner straight diameter than K though. Post your current specs that you are happy with and conditions and I'll try and match something up.
|
#3
|
|||
|
|||
Before I did the RB carb and head mod I ran a 165MJ/38PJ, LTR -0 needle. It worked pretty decent for me. You are going to struggle with finding power at that elevation regardless. My new settings with the RB mods for 8-10,000 are 172MJ/40PJ, CEK needle. The RB mods make a big difference running at high elevation. Everything around here at 10000ft is still under 10 feet of snow!
05' EC300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2005 EC300 vs 2007 EC300 | alecsstefan | Enduro Engine - 2 stroke | 19 | 01-22-2010 01:40 AM |