|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Countershaft seal replacement
Is the counter shaft seal a standard item or dealer only? Mine seems to be damp around it and will need changing soon I imagine.
__________________
2006 EC300, 2000 XR650R, 2003 EC250, 2001 EC200 (OK, the last two are really my sons). |
#2
|
||||
|
||||
You can probably match it up at a bearing supply shop.
I would do the sleeve also at the same time. The seal can wear a groove in the sleeve, it would leak with the new seal. |
#3
|
|||
|
|||
In a pinch you can position the seal slightly not seated and wear new grooves in the sleeve.
|
#4
|
||||
|
||||
Standard metric seal. I don't have the parts manual handy but I think the size is listed in the description. Also replace the o-ring, and be sure the sprocket fits tight enough to compress it, shim if needed.
|
#5
|
|||
|
|||
I was a little confused at the parts breakdown as it listed the sleeve as a seal, but I see now how it works. Sleeve costs $25, seal $6, lol. These parts prices are inconsistent seems like.
__________________
2006 EC300, 2000 XR650R, 2003 EC250, 2001 EC200 (OK, the last two are really my sons). |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seal replacement on conventional 45mm Marzocchi? | renotsttam | Enduro Suspension | 6 | 06-14-2015 01:29 PM |
fork seal replacement wp 43 | dank | Enduro Suspension | 1 | 05-01-2010 03:50 AM |
Crankshaft Seal Replacement | buzzard | Enduro Engine - 2 stroke | 5 | 01-28-2009 05:52 PM |
Needle replacement tip | scarylarry | Enduro Intake/Carburetion - 2 stroke | 5 | 08-07-2008 02:01 PM |
Replacement Kickstarter | svt2224 | Enduro Engine - 2 stroke | 2 | 03-28-2008 02:39 PM |