countershaft sprocket

[bones150]

Hello
New 300 counter shaft sprocket. Same as any other bikes ? Would like to find aftermarket one out there.

[Fred1956]

SuperSprox & Renthal are a couple. I think Ironman is stock, also I think it's a GasGas only thing- no cross reference

[thumperrider1]

The stocker on the 2012 is a Talon.

Are you looking to change out to another size?

[bones150]

Yes 1 tooth smaller

[thumperrider1]

good choice right here Bones.

http://www.gofasters.com/productdeta...atalogId=-2231

[AZRickD]

Can we cram a 14T in there?

I'm considering DualSporting the 300.

[Binni]

My buddy has a 14t on his 2006

[gasser]

Originally Posted by AZRickD

Can we cram a 14T in there?

I'm considering DualSporting the 300.

Why go to a 14 up front? A 42T rear should give you all the speed you want. You can get 42T and 49T rears at Rocky Mountain ATV for 20 bucks.
1991 Suzuki DR350S and 1999 and later GasGas enduro bikes use the same rear sprockets. I had this same sprocket (49T) on my 2007 ec300.
http://www.rockymountainatvmc.com/p/...Steel-Sprocket

[slocalspode]

Originally Posted by AZRickD

Can we cram a 14T in there?

I'm considering DualSporting the 300.

I did it on my 1998 EC250SM conversion.
http://www.gasgasrider.org/forum/sho...95&postcount=2
Had to do a little grinding on the clutch master. I also had to pull the swing
arm bolt and slid the swing arm back to get the sprocket past the plastic
swing arm guard. But it fit and has worked for the past two years or so.
Jeff

[AZRickD]

I'd be swapping it too often to want to deal with that. Maybe the 2012 has more room?

Looks like I'll be leaning toward the rear sprocket.