|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#21
|
||||
|
||||
Gotta watch for kinks in the line.. and after a while they do block up too. Amazing how much crud can still find their way in there.
|
#22
|
|||
|
|||
Lean?
So I dropped the main jet down to a 172. the bike is going great once it warmed up, no bogging at. I managed to get a decent plug chop at wide open throttle on a service road at the end of my ride this weekend.
What do you reckon on this plug? Looks a bit lean, might go back up to the 175 or 178. I checked the plug last week after normal trail riding and it was black, so not lean in the 1/8 to 1/2 throttle range. Thinking about lifting the needle clip to (from 3) 2 to go with the 175, many people out there running that combo? Cheers all |
#23
|
||||
|
||||
In the old days of leaded fuel I'd say that looks mighty fine. Not sure about unleaded, all my roadracing was with leaded av gas.
Just try the needle for feel.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
Tags |
base gasket, bog, squish, wot |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wet base gasket | thejackrabbit | Enduro Engine - 2 stroke | 6 | 02-09-2014 01:03 PM |
300 base gasket choices? | husley | Enduro Engine - 2 stroke | 11 | 01-22-2013 08:30 AM |
Base Gasket re-use? | motogroove | Enduro Engine - 2 stroke | 5 | 06-26-2011 07:56 PM |
Base gasket | Ud_luz | Enduro Engine - 2 stroke | 21 | 05-09-2008 07:38 AM |
Base Gasket | gtsnowcrack | Enduro Engine - 2 stroke | 6 | 09-09-2006 05:43 AM |