Crankshaft play - how much is too much ?

[poelinca]

As the title says, how much ?

https://www.youtube.com/watch?v=hHMONJp6qhA


p.s. sorry for the shaky hands, but it really moves around

[rvangeel]

The side to side play is not your main concern. You want to check the up/down play. I don't know what the acceptable up/down tolerance is though.


Sent from my iPhone using Tapatalk

[Leo]

Any noticeable radial play isn't good
Side play is ok at 1 or 2mm range

[Anders]

Originally Posted by rvangeel

The side to side play is not your main concern. You want to check the up/down play. I don't know what the acceptable up/down tolerance is though.


Sent from my iPhone using Tapatalk

If you can feel up and down play I'd say its too much.

Sent fra min GT-I9295 via Tapatalk

[poelinca]

Up and down is non existent. Side to side is what i was worrying about, but if you guys say up to 2mm is fine, then i'll just leave it as is.

[stabak]

side to side per service manual, with a feeler gauge in the connecting rod standard 0.8mm, limit 1mm

Up/down, doubt you can feel it installed...

Judging by the video it is ok....

[poelinca]

Thanks guys for the quick replies and info.