|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
Geeeze she's dirty!!
Ohlins use plastic spacers to set the shock lengths. Completely normal. Here's a pic I snapped when I serviced a mates 09 888. |
#12
|
|||
|
|||
Well blow me! Strange how 1 is and 1 isn't then.
Thank generic divine entity for this forum!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#13
|
|||
|
|||
These are the shim stacks I've found and what I've done.
2006 - this was revalved by a very renowned tuner in the UK, needless to say it was terrible, very harsh spiking over square edges, so I've removed the 2 stage, added another face shim, and put 2 smaller base shims in for firmer low speed and softer high speed. Comp 40.2 40.2 40.2 40.2 40.2 40.2 30.1 ** + 40.2 26.15 ** 38.25 36.25 34.25 32.2 30.2 28.2 26.2 23.2 21.2 +20.2 +18.2 Reb 36.2 36.2 36.2 36.2 26.15 36.2 34.25 32.3 30.3 30.15 28.3 26.3 25.3 24.3 23.3 Spare rear shock from earlier model with no HSC adjuster Rebound 36.2 36.2 36.2 36.2 36.2 34.25 32.25 30.25 28.25 26.25 23.25 22.25 21.25 20.25 19.3 19.3 Comp 40.2 40.2 40.2 40.2 40.2 40.2 40.2 21.15 38.2 36.2 34.2 32.2 30.2 28.2 26.2 23.2 20.2 18.2
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where to buy Ohlins shock parts (2012 Ohlins 888) | CDBiker220 | Enduro Suspension | 2 | 04-22-2017 07:02 AM |
Shim stack for woods racing 45 marzocchis | sam097 | Enduro Suspension | 3 | 03-06-2017 10:09 AM |
Marzocchi 48 shim stack profile. | Barbs | Enduro Suspension | 17 | 02-29-2016 07:12 AM |
2012 Ohlins lower shock bushing and Problem with shock. | CDBiker220 | Enduro Suspension | 1 | 08-04-2014 09:35 PM |
2011 300 xc Ohlins shock shim stack | BrentMartell | Enduro Suspension | 6 | 04-12-2012 09:51 AM |