|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2012 200
can anyone tell me what theyre running for jetting for a 2012 0r 13 200?
|
#2
|
||||
|
||||
jetting 2012 200xc
White,
Another member turned me on to his spec. which is 45 pilot 6.5 slide stock needle 2nd clip from top and 172 main jet. This seems to work very well for me. good luck. |
#3
|
||||
|
||||
What was the stock needle? From all of my experience jetting all the bikes I have, the real magic is in the needle. Not surprising as it covers the largest range of throttle openeings.
|
#4
|
|||
|
|||
I miss needle jets!, thanks john
|
#5
|
||||
|
||||
2012 200xc jetting
Jake,
I'm glad you reviewed the post,as I wanted to get your thoughts on the needle which is nozh. I'm very happy with the jetting Hamilton has suggested. However still massive amounts of spooge @ the exhaust. keep in mind I have yet to get the squish corrected. I'm also thinking of trying the cannon silencer. Good luck w/ the tear down, looks good so far.Almost forgot mixing silkolene @ 32:1 92 oct.pump piss guessing 1500 feet above sea level. |
#6
|
||||
|
||||
Cheers John,
NOZH is the same taper profile as the N1Ex but half a clip position leaner. I find it interesting that GG is actually using a leaner needle in their 200s than they are in the 300s. I played with that taper profile in my 300 and the 1st taper was always too rich. I never even bothered with the 250 top end, but I'm not surprised it runs alright in the 200. Generally the smaller bores will require richer jetting. Your spooge could be from the first taper, but more likely its just the fmf spoogecannon q-series silencer, especially considering you said its running well. Thats the most important part of it all. |
#7
|
||||
|
||||
2012 200xc jetting
Thanks Jake,
Hey I've been meaning to ask, I was kicking around the Ausie gg site and ran across a photo of a bloke and his wife? They both had mullit hair doo's.I fell out of my chair laughing. No disrespect if this is there norm. Lol... Do you know the photo I'm speaking about? |
#8
|
|||
|
|||
Quote:
I've read on here some earlier 200's having a 6.5 slide
__________________
2011 GasGas ec300R 2011 GasGas ec200 Six Days |
#9
|
||||
|
||||
My 2012 200xc came w/ a #6 slide as well.
|
#10
|
||||
|
||||
The 300's and 250's seem to come with a #7 non notched slide. Or a #6.5 notched.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2012 xc 300 | modette | Enduro Engine - 2 stroke | 0 | 12-16-2012 12:28 PM |
2012+ 125?? | surfer1100 | General Discussions & Announcements | 18 | 09-29-2012 11:11 AM |
2012 ISDE Six Days - 2012 Bike Prep Questions | Graham | General Discussions & Announcements | 31 | 09-21-2012 03:12 PM |
2012 450 | tm_enduro | General Discussions & Announcements | 1 | 11-22-2011 06:35 PM |