|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Cilinder gasket kit 300 2018
Hi
Does any one know if a kit for a 2015 ec 300 would fit a ec 300 2018? https://www.motocrosscenter.com/shop...25944101.html# I'm starting to planing a piston change. Regards. |
#2
|
|||
|
|||
I found this on eBay (item num 362081509427) so would guess yes a 15 base gasket will fit. I?m new to gasgas as well and just asked a similar question
|
#3
|
|||
|
|||
Quote:
|
#4
|
||||
|
||||
I do not know, but I would be surprised if the older base gaskets doesn't fit the 18 and 19.
Edit: After checking the parts catalogs online, I see that both the 0.15mm and 0.30mm gaskets have the same part numbers for my 15 model and the 19 models. The 0.5mm gasket does not. I suppose that means there is a minor cahnge, but that older gaskets can be used?
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 XC 250 Base Gasket | Jacob 'Berg | Enduro Engine - 2 stroke | 4 | 08-22-2018 03:01 PM |
Top end gasket kit | poelinca | Enduro Engine - 2 stroke | 20 | 06-11-2016 11:06 PM |
07 gasket kit into a 09? | lonetree | Enduro Engine - 2 stroke | 3 | 07-10-2014 12:14 PM |
Gasket Set. | Marki | Enduro Engine - 2 stroke | 3 | 12-02-2011 06:15 PM |
Base Gasket | gtsnowcrack | Enduro Engine - 2 stroke | 6 | 09-09-2006 05:43 AM |