|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
EC/GP300 Front wheel bushing
On all 2018 300's the front wheel bushings are same size on both sides. What I do not understand is, that the bushings have a ridge on one side which is intended to slip into the wheels outer seal.
The funny thing is that on the right side the bushing is installed the "wrong" way and its ridge points outwards (see pictures below). I checked this on all bikes my dealer had in the show room and on my friends bikes, they all have the right hand side bushing installed with the ridge pointing outwards. Can anyone explain me why az GasGas they install it this way? Some riders I know have turned the right bushing so that its ridge slips into the seal. The bushings: rh side on my bike lh side on my bike, ridge inwards rh side, new bike lh side, new bike |
#2
|
||||
|
||||
The ridge needs to be on the inside.
Keeps the spacers from falling out when you remove the axle. I have switched them around to get more life out of them. |
#3
|
|||
|
|||
Quote:
Was yours installed with the ridge pointing outwards? |
#4
|
||||
|
||||
Mine were correct.
Really doesn't hurt anything to run them backwards. |
#5
|
||||
|
||||
My 2013 was setup from the factory as yours are too.
Think it's just the way they do it.. Spanish flare or something! As above, makes little difference which way they go. |
#6
|
|||
|
|||
Thanks Jakobi, in the meantime I checked the parts book and the drawing is, as you probably expected, correct. The ridge points to the wheel.
Talked to a German dealer and he said the bikes come delivered with front wheel not installed and the left, only the left, bushing is strapped to the wheel with a zip tie. Obviously the assemblers just dont know and install it the wrong way. No big deal, I was just wondering. So all clear now |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cant get my front wheel off | mwinschel | Enduro Chassis & Body | 7 | 03-05-2016 01:13 AM |
FOR SALE, 250XC forks, NEW fender, front wheel, front wheel bearings | iamyvr | Parts | 5 | 07-27-2014 08:18 AM |
Front wheel ? | Silver | Enduro Chassis & Body | 2 | 04-20-2009 05:33 PM |
'06 EC300 Rear wheel "top-hat" bushing | Eugene | Enduro Chassis & Body | 1 | 01-23-2009 10:27 AM |