|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2019 EC300 parts compatibility
Hi;
So I just bought a 2018(19 model year with the different powervalve adjustment) EC300 with about 130 hours on it (the trip computer shows 105, but the seller claims it was changed out about 30 hours in). It supposedly also has a new-ish piston - but you all know how that goes. The bike as a rattling noise at iddle, that I hopped was the common power valve preload issue, since the bike didn't like to get into the pipe consistently. However, the powervalve is the newer system that you can set the preload from outside the clutch cover. After cleaning out the powervalve, which was absolutely caked in hard carbon that not even the ultrasonic cleaner could touch, the noise was still there. There's a bit of a ring ridge in the cylinder and I can fit a 0.25mm feeler gauge between the top of the piston and the cylinder itself. I'm waiting on a dial bore gauge to get a proper measurement, but I'm guessing the cylinder is pretty much done Now to the actual question. Does anyone know if the 2017 cylinder will fit the 2019 bike? I can get the whole cylinder/piston/lid kit for about 500?. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2019 ec300 fuel | mrquick | Enduro Engine - 2 stroke | 76 | 09-29-2021 01:58 AM |
2019 GasGas EC300 | Kootz193 | Used Bikes | 0 | 04-22-2020 03:23 PM |
2018/2019 EX / XC Parts for Sale in the UK | RudolfHucker | Parts | 0 | 03-12-2019 01:00 PM |
2019 ec300 | Saddleback51 | Enduro Intake/Carburetion - 2 stroke | 0 | 11-08-2018 12:26 PM |
Parts Compatibility for EC200: 2004 vs 2001 | SpeedyManiac | General Discussions & Announcements | 3 | 04-05-2007 10:19 PM |