Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-28-2021, 08:59 PM
barbotte barbotte is offline
Member
 
Join Date: May 2017
Posts: 54
Default kick start shaft snap help

hello is there a video or instruction on how to replace the kick start shaft on my 2014 ec 300? i read old tread and did not see any one mention it .... i saw 1 on u tube but it was on a trial bike is it the same ?... do i need to remove my recluse to get access to it ?? i order one from eBay and should be here in the next 3 week.. i snap my shaft in the deep wood and had to pull bike for more than 2.5 hr it was not fun as electric star is also broke but that is another subject lol


Reply With Quote


  #2  
Old 07-29-2021, 02:43 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,116
Default

No, you dont need to remove the clutch. There is a workshop manual available. If you cannot find it on line, I can send it to you.
Just send me a PM with your email address.

Sent fra min YAL-L21 via Tapatalk
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #3  
Old 07-29-2021, 04:26 PM
barbotte barbotte is offline
Member
 
Join Date: May 2017
Posts: 54
Default

pm sent thanks
Reply With Quote
  #4  
Old 07-31-2021, 02:44 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,116
Default

Reply with manual sent by email. Please aks here if you need help when your parts arrive.

Sent fra min YAL-L21 via Tapatalk
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
18 EC300 E-Start shaft removal? Demi Enduro Electrical & Wiring 16 03-01-2021 02:48 AM
2005 EC300 Kick Start spline/shaft icebergstu Enduro Engine - 2 stroke 2 03-08-2019 01:46 AM
Snapped kick start shaft dANbOT Enduro Engine - 2 stroke 11 11-19-2018 04:51 PM
kick start shaft dANbOT Enduro Engine - 2 stroke 11 09-07-2015 11:20 AM




All times are GMT -5. The time now is 09:15 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org