#1
|
||||
|
||||
WTB Scotts Damper Post
I'm looking for a post/tower for a scotts steering damper that will fit a 2011.
Thanks Dan |
#2
|
||||
|
||||
Under mount ? standard mount? What setup do you have?
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#3
|
||||
|
||||
'11 B frame has smaller neck dia., same as some KTMs so more options. The Fastway collars/posts are very nice, modular, and likely available.
|
#4
|
||||
|
||||
I think that I measured my 11 at 57mm and the 13 at 62mm.
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day. |
#5
|
||||
|
||||
That is correct, '12 frame and pre-'10 are the same at 62mm, '10/'11 B frames 57mm.
|
#6
|
||||
|
||||
I'm doing a standard over the bars mount.
Fastway says the don't make them for a GG. I'm going to get one of thier adjustable handlebar mounts. |
#7
|
||||
|
||||
Did you check what BRP has? brpmoto.com, is the url
__________________
Rob Granger / Katy, TX EC300 Breaking more things by 8:00AM than most people break all day. |
#8
|
||||
|
||||
Fastway makes one for a KTM that will fit a '10/'11 GG, they just don't know it. I saw a '12 300 at a race with a Fastway tower, so either it was a modified part or one for another bike fits as well. They are not to eagar to help, by measuring, looking up dimmensions, etc.
|
#9
|
||||
|
||||
818 248-6747 is the number at Scott's they'll get the right stuff the first time. Always been very helpful to me
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#10
|
||||
|
||||
Problem is the Scotts/BRP posts are weak, I've bent two and broken one. I run my own design post now, off my '07, but I'd like a good replacement and don't have the time to fab and weld another one.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Scotts Damper Settings | Neil E. | Enduro Chassis & Body | 6 | 06-12-2012 02:03 AM |
Scotts damper service? | wence | Enduro Chassis & Body | 28 | 01-06-2012 10:55 PM |