GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-02-2019, 04:41 PM
Ponyboy Ponyboy is offline
Member
 
Join Date: May 2019
Posts: 2
Default New back rim...

To begin i own a 2012 ec250e.

Got some new tires in the mail. Sent the wheels out to have them put on. With only having owned the bike for a year, and getting it used, the back wheel is pretty chewed up and bent. The shop got the tire off, but broke their machine doing it, and refuse to put the New tire back on.

Option A. Try to get the tire on myself and hope it works. I mean I've been riding it how it is for a year now. I doubt it's optimal but I just like to putt around on trails. How bad is it to ride with a couple bends in the rim?

Option B is send it out to have a new rim installed. But because, to my knowledge, the gasgas uses it's own spoke gapping/spacing on the hub, it's gotta be custom drilled to order. Not exactly "cheap" when the rim and spokes are gonna cost 6-700.

Option C. For about $1400 I can get some custom built front AND rear wheel. Anozied hub, solid rims etc. From Australia of course shipped to the US.

Or if someone has a complete rear wheel that fits, and are willing to sell it. I am interested. Otherwise I'm stuck on What to do. Any ideas?

Another option is slap the old tire back on and trade it in with cash and get a 2019


Reply With Quote


  #2  
Old 11-02-2019, 06:26 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,197
Default

Option D. Find a new shop.

Replacing a time is not rocket science.
Reply With Quote
  #3  
Old 11-02-2019, 07:32 PM
fred99999au fred99999au is offline
Member
 
Join Date: May 2018
Posts: 61
Default

I vote for option D
Reply With Quote
  #4  
Old 11-02-2019, 07:49 PM
Wimpy525 Wimpy525 is offline
Senior Member
 
Join Date: Oct 2011
Location: Catawissa Pa
Posts: 388
Default

I've got a used set 400 bucks
Reply With Quote
  #5  
Old 11-02-2019, 08:27 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 1,415
Default

Option D through E. 4hundy sorts the problem.

Broke their machine through gross incompetence and try to blame you..

Sideways bulges can be reduced with careful use of a press which often brings things closer to round. Then soak nipples (the bikes not yours sicko) in penetrating oil and watch a YouTube clip on wheel trueing. You can repair a fair bit.

I mean sometimes a rim is too far gone but its worth a play and a new skill learnt.
__________________
'07 EC300
496 CPI Cheetah RZ/RGV hybrid
675 Street Triple R
RS125 framed MB100 racer
Stinger T125 Suzuki
Reply With Quote
  #6  
Old 11-02-2019, 08:51 PM
Ponyboy Ponyboy is offline
Member
 
Join Date: May 2019
Posts: 2
Default

Ok so quick update. Went with option D since it was the easiest and cheapest option.

The 2nd shop has no issues putting it on for me. Had it done in 10 minutes. Obviusly its not the optimal setup for a race bike. But I have no plants what so ever to do anything more than play riding. Anyways thanks for the replies guys! I'll probably look into a new wheelset in the next couple months after a top end job.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas gas back on top of bec rvktm General Discussions & Announcements 0 02-15-2018 01:25 PM
back on a GG knobbyboy General Discussions & Announcements 8 05-06-2014 10:17 AM
We're Back. :-) webmaster General Discussions & Announcements 22 06-22-2013 11:35 PM
250 vs 300 back to back comparison firffighter Ride Reports 9 05-02-2011 10:20 PM
Two "Don't Miss" Races Back to Back twowheels Mid-West Forum 0 09-14-2010 10:11 PM




All times are GMT -5. The time now is 08:25 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org