Rear brake pedal crossover?

[jt633]

Does anyone know what rear brake pedal will fit an 04 gasgas for sure? Ive read here kx with mod but doesent specify and ive read kx500 fits just want to be sure will work before i buy my pedal isnt bent at all it just rubs and is very sloppy

[Fred1956]

I haven't personally done it but I believe late model YZ brake pedals work, I don't think anything is a direct crossover though

[300ECR]

I had the same problem on my 08 300 so I had I machined out and fitted two needle roller bearings. I fitted it wit a new inner bush and it works better then ever before.

[fullthrottle]

I fitted a wr450f rear brake pedal, only had to put a few mm spacer between frame and pedal, wind the clevis down to get height and press a spacer in to the frame to suit the wr bolt also streched wr pedal return spring slightly and used that.
End result much better NO slop at all and a pedal that is cheaper to replace stronger and has a better pivot/bearing setup
[/QUOTE]

[steliost]

try this maybe?
http://www.gasgasrider.org/forum/showthread.php?t=12537

[jt633]

Thanks for the advice guys! What year wr450 did that come from?

[steliost]

I believe any year YZ-WR pedal will do. (1998-2008?)

[jt633]

Thanks for the info! Just ordered a nice blue tusk one with a brake snake was gonna get hammerhead one but this one was 20 cheaper

[jt633]

Here it is ended up using washers for a spacer ha trouble winding down master clevis
But got it as low as i could

[desertgasser300]

Originally Posted by jt633

Here it is ended up using washers for a spacer ha trouble winding down master clevis
But got it as low as i could

That looks very nice, thanks for posting.