|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Wheel X-over
Hey Guys,
This is my first post and first Gas Gas. I am super excited, however, I am curious about wheels. I plan on converting my 01 EC250 over to supermoto but want to save my stock wheels for trail riding. I have searched on here and so far the consensus is that the hubs are Gas Gas specific. I found that Moto520 converted a rear KTM wheel using the Brembo brakes, but he did not say anything about the front wheel or whether the stock brakes would work. Is there any help on this or am I stuck lacing my stock hubs? Thanks very much for your help! Logan |
#2
|
||||
|
||||
Why not purchase the GasGas supermoto wheelset?
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#3
|
|||
|
|||
First, that would make too much sense. And second, I can't get them through my work unfortunately.
|
#4
|
|||
|
|||
No your not stuck lacing your stockers Talon (UK) makes sick looking hubs for the Gassers.
|
#5
|
||||
|
||||
Would you have a link or a part # for the Talon (UK) GasGas hubs?
I have my 98 EC250 set up for the street using 21" and 19" Dunlop K180 Dirt Track tires. Some day I would like to go with 17"s and some wide tires. Cheers, Jeff |
#6
|
||||
|
||||
GasGas hubs (AJP) are very reasonable, and I have never heard of one breaking in my 7+ years on the bikes. Check this out before going aftermarket.
|
#7
|
|||
|
|||
Well, I just found out that the rear wheel from a Cannondale will fit with no modifications! That means that (though I don't know from personal experience--just from what I have read) a Honda CR250R wheel should fit. The front wheel does not fit. The spacing is too narrow and will have to have spacers made to fit. The axles are the same diameter.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Will anything other than a GG rear wheel fit on a GG? | cal_tony | Enduro Chassis & Body | 7 | 10-02-2013 11:20 PM |
Will anything other than a GG front wheel fit a GG? | cal_tony | Enduro Chassis & Body | 7 | 11-08-2008 09:21 AM |
Need a wheel for 99 EC300... | ricegas | Enduro Chassis & Body | 4 | 10-20-2008 07:54 PM |