|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
exhaustgasket EC250 -00
i think i blew the exhaustgasket on my EC250 SM -00 - doing a 100mph pull on the road.... Anyone have a picture and can tell me the measurments of such ?
|
#2
|
||||
|
||||
Are you sure its not only the orings?
Sent fra min YAL-L21 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
||||
|
||||
It could also be the gasket between the exhaust flange and the cylinder. If it is that gasket, you can remove the flange and cut a gasket out of flat gasket material with a sharp knife.
|
#4
|
||||
|
||||
Did the flange just come loose? Not sure how an exhaust gasket like that could just fail with how that flange is designed. That being said, my 1992 volvo wagon eats an exhaust gasket every year. The header pipe isn't quite flat, so pressure isn't evenly distributed, so the gasket fails.
|
#5
|
||||
|
||||
If/when ;-) the pipe gets bent, it puts an uneven force on the flange and gasket.
|
#6
|
|||
|
|||
The upper of the three bolts onthe flange was gone and the gasket kinda exploded - i ordered one finally. but made a temporary out of gasket-material - and it actually works.
|
#7
|
||||
|
||||
There you go - lost bolt, gasket eroded. Nailed it.
|
#8
|
||||
|
||||
Kristian,
where do you live? Your name sounds quite scandinavian.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#9
|
|||
|
|||
South of Sweden. near Helsingborg. you ?
|
#10
|
||||
|
||||
Close to Kongsberg in Norway. Approx 80km west of Oslo
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
difference between ec250 and ec250 race? | Dirt Addict | General Discussions & Announcements | 2 | 10-24-2009 02:56 PM |