Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-22-2018, 02:22 AM
Wilmer Wilmer is offline
Member
 
Join Date: Jan 2018
Posts: 22
Default Screw instead of a vent to the cylinder

Hello. I have a GasGas EC 125 05. And I saw that on the left side of the cylinder there is a little screw. But when I looked in the partlist of the bike a can see that there is going to be some sort of a vent. With a hose on. I wonder what that vent do and if I am going to replace the little screw with a knew original vent with a hose on? Will there be any difference? Will the bike go better or is it just better for the engine if there is the vent there. Here is a few pictures of my bike and someone else's bike with the vent.

My bike

image5.jpg

image3.jpg

How it is going to look

image1.jpg


Reply With Quote


  #2  
Old 02-22-2018, 11:34 AM
Archibald Archibald is offline
Member
 
Join Date: Mar 2017
Location: CO
Posts: 38
Default

My 300 had the screw in place of the vent when I got it. I replaced it with the original nipple/hose and ran the hose into the bash plate. It seems to run about the same, but there is significantly less spooge in the left exhaust valve cover.
Reply With Quote
Reply

Tags
cylinder, gasgas ec 125



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Name that vent hose! NM_GG_Rider Enduro Engine - 2 stroke 7 03-18-2019 09:03 PM
air vent kit muellersq Enduro Intake/Carburetion - 2 stroke 0 09-16-2016 02:10 PM
Powervalve vent nipple GGRider01 Enduro Engine - 2 stroke 5 10-18-2015 07:35 AM
power valve vent ? walker1008 Enduro Engine - 2 stroke 6 01-14-2010 08:36 PM
PV vent hose......... Help joey11 Enduro Engine - 2 stroke 2 06-16-2008 12:21 PM




All times are GMT -5. The time now is 11:34 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org