Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Other Bikes... > All Other Bikes...

All Other Bikes... KTM, Husky, VOR, Husaberg & Hondayamazuki...


Reply
 
Thread Tools Display Modes
  #1  
Old 03-13-2018, 10:47 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default 84 RM 250 E Ground UP Full Restoration

Here I go again with another restoration. I always liked the Suzuki RA and RH Works bikes and the 1984/1985 RMs were the production copy of those bikes.

I just had this 84 shipped in last night. This bike was parked in a garage in 1991 and never touched for 26 years! Besides the surface rust, she is an original stock bike. This will be a slow build.









Drum Brakes


__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote


  #2  
Old 03-13-2018, 10:51 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

Piston rings are stuck in the cylinder. Look at the wild design of the frame tubes.


Original old school Fox and Cycle News stickers.


__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #3  
Old 03-13-2018, 01:07 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Kewl. From distant memory as a teenager I remember the Z was supposed to be s ripper (or was it the D?) And the next year was panned as being flat. DirtBike did an article showing the only diff was the cylinder head and either skimmed and or reshaped it like the previous year. Where that leaves the E. . .
Just a thought. Cool bike.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #4  
Old 03-14-2018, 10:05 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

Quote:
Originally Posted by (F5) View Post
Kewl. From distant memory as a teenager I remember the Z was supposed to be s ripper (or was it the D?) And the next year was panned as being flat. DirtBike did an article showing the only diff was the cylinder head and either skimmed and or reshaped it like the previous year. Where that leaves the E. . .
Just a thought. Cool bike.
Thanks for the input! I have the January 1984 issue of Dirtbike with the test on this bike. They said the stock 36 mm mikuni carb was way too small. They went to a 38mm and even a 40mm. I'm probably going to install an 38mm Air Striker II like on my honda build.

Btw, the bike feels light, its listed at 225 pounds with one gallon of fuel.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 03-14-2018 at 11:19 AM.
Reply With Quote
  #5  
Old 03-14-2018, 12:04 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Heck i remember that. 36mm what a tiny carb to put on a 250 with some picture of a hairy dude looking like some clueless hairy dude with a couple if carbs. Or maybe that was their jetting article. I was a clueless teenager who was probably at the right level to read those articles.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #6  
Old 03-14-2018, 02:50 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

Quote:
Originally Posted by (F5) View Post
Heck i remember that. 36mm what a tiny carb to put on a 250 with some picture of a hairy dude looking like some clueless hairy dude with a couple if carbs. Or maybe that was their jetting article. I was a clueless teenager who was probably at the right level to read those articles.
Me too, I was about 18 when that magazine came out. The 40mm carb they tried was a Magnesium Bing with a 65 pilot, 284 needle,210 main,180 slide,6L needle. With the Bing carb and Boyesen reeds they said the performance was "fantastic' and it was more than a match for the CR250.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 03-14-2018 at 02:51 PM. Reason: spelling
Reply With Quote
  #7  
Old 03-16-2018, 11:22 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

Last night, I pulled the tank and seat off.


Look what I found under the tank....


It seems she really has been sitting for a LONG TIME.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #8  
Old 03-16-2018, 11:31 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

Ok, back to the inspection. The bike seems to be very original. There doesn't to be anything missing or anything fouled up by screwball maintenance. Its simply neglect.
The floater linkage is complete, intact, very smooth and works very nice.




Original silencer



Original pipe, it doesn't seem to have any damage.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 03-16-2018 at 01:58 PM. Reason: Grammer
Reply With Quote
  #9  
Old 03-16-2018, 11:43 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

The piston is stuck. I drained the coolant, it was very clean and the rads were full, no oil and no leaks. Rads look good too. Tonight I am going to remove the head and put some Kano Aerokroil Penetrating Oil in the intake and exhaust ports and the piston. I looked at the piston through the exhaust port, it looks good,no damage, just a dusting of a small amount of rust.




Here is what I am finding on most of the bike, there is a mixture of red clay and rust on the exposed bolts but the inner parts of the bolts look new.


I am going to cover the ports and clean the whole bike.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #10  
Old 03-17-2018, 03:37 AM
slodrew slodrew is offline
Member
 
Join Date: Jan 2017
Posts: 23
Default I saw this after looking over your post..

https://slo.craigslist.org/mcy/d/dir...531466066.html
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
94 CR 250 Ground Up Restoration IMS Wide Ratio Transmission Issue Moto7man All Other Bikes... 146 01-28-2018 05:57 PM
1994 CR 250 Restoration featured on Dirt Bike Magazine Webpage Moto7man Pictures & Videos 8 10-28-2017 09:12 AM
Gas Gas Contact Jt 25 95 Restoration And Help Eyetech General Discussions & Announcements 1 03-18-2016 03:33 PM
2001 XC200 Restoration Project Lincolnlock Enduro Engine - 2 stroke 19 04-22-2014 03:42 PM
My Stomping ground swazi_matt Ride Reports 10 03-02-2011 09:35 AM




All times are GMT -5. The time now is 04:19 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org