Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 07-10-2014, 09:36 AM
richgilb richgilb is offline
Member
 
Join Date: Feb 2014
Posts: 59
Default GasGas UK's suggestions for more low end

Me and another chap who may be working on my EC200 have just had 2 separate conversations with 2 different people at Gasgas UK regarding getting more bottom end power.

Both conversations went along the lines of "don't bother with flywheel weights and volume powervalves, just thin the bottom gasket first, as it is easier than doing the squish and has decent impact. Then do the squish if you still need more."

I was hoping to get a powervalve spacer or flywheel weight and just bolt on but he said I'd just slow the bike down. Most people seem to report some grunt for a weight. Confused. Maybe I should just buy them and see.
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
50/50 tire suggestions? Why Z? Enduro Chassis & Body 3 05-22-2014 07:20 PM
Needle suggestions? siaknijustin Enduro Intake/Carburetion - 2 stroke 5 10-27-2012 08:19 PM
Spring rate suggestions please wasp4banger Enduro Suspension 7 08-23-2012 11:26 AM
need a new air filter any suggestions.... dareuk Enduro Product Reviews 4 03-24-2010 04:05 PM
Suggestions on removing swingarm roostafish General Discussions & Announcements 12 10-04-2009 11:11 PM




All times are GMT -5. The time now is 08:23 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org