#1
|
|||
|
|||
WTB 2004-2006 EC Seat
Ok, after finding myself a new old stock Clarke tank for my 2002 EC, I find out the seat won't fit !!
Would like to get hold of 2004-2006 EC seat cheap !! if anybody has one lying around please ?? Paul |
#2
|
||||
|
||||
I have one in Norway. Where are you located?
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
|||
|
|||
Hi Anders. I am in the UK.
Paul |
#4
|
|||
|
|||
Although a bit confused now !! (Not hard )
Clarke install document says 2000-03 bikes will require seat from 2004-06. On the official parts list for each year 2004-06, there is a part number listed for a 250 seat but not the 300 ?? |
#5
|
|||
|
|||
|
#6
|
|||
|
|||
By the way, apologies for posting in the wrong section.
Can I/mods move to the 'WTB' section ?? |
#7
|
||||
|
||||
Would you like a shipping quote? I'm afraid its quite expensive. However, the seat would be pretty cheap. I have in fact two seats, one complete and one seat pan with foam.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#8
|
|||
|
|||
Hi Anders.
Could you get a quote based on the complete seat please ?? We have a saying in the UK for shipping, ?snail mail?, meaning a cheap service even if it takes a while, so this will do Been fannying around with this piece of junk since last October so another couple of weeks won?t matter Thanks, Paul |
#9
|
||||
|
||||
Quote:
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#10
|
||||
|
||||
Even with snailmail the shipping will be approx GBP 35 for a 3 kg box. If I mange to get it below 2kg it will be a couple of pounds cheaper.
There are some small holes in the cover, but its fully usable as it is. How about 50 pounds including shipping?
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2004 EC300 Seat Pan | risk74 | "Wanted to Buy" & "Want To Trade" | 3 | 12-28-2016 05:42 PM |
Similarities/Differences 2004-2006 EC300 | risk74 | General Discussions & Announcements | 3 | 10-03-2016 09:17 PM |
2004 seat foam | Gasgasogeros | Enduro Chassis & Body | 2 | 05-10-2011 06:09 PM |
2003 vs. 2004 seat. | GasGasser | Enduro Chassis & Body | 0 | 09-30-2009 05:54 AM |