Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #11  
Old 11-11-2017, 02:13 PM
Adam_redneck Adam_redneck is offline
Member
 
Join Date: Dec 2015
Posts: 13
Default

Quote:
Originally Posted by Loki View Post
Not to hijack the thread but I'm wondering whether the sensors and injector might cross over from Suzuki as well
DRZ400’s are Carbureted and not EFI. Sorry!


Reply With Quote


  #12  
Old 11-11-2017, 04:45 PM
Harry's Avatar
Harry Harry is offline
Senior Member
 
Join Date: Nov 2006
Posts: 301
Default

some good info here - http://www.gasgasrider.org/forum/sho...ghlight=taiwan
Reply With Quote
  #13  
Old 11-16-2017, 02:16 AM
expirmininkas expirmininkas is offline
Member
 
Join Date: Nov 2017
Location: Lithuania / Lietuva
Posts: 36
Default

As regards bearings, you can search for another brand like KOYO etc. When I had Yamaha, I could buy 3 bearings (Timken) and two seals for about 14 eur instead of ~ 100 eur (offered by Yamaha dealer). Later on I foud out, that Yamaha uses (at least for XT6600) KOYO bearings as a standart.

Added 30 Jan 2018:

As regards bearing for the front wheel of GG FSE 450, 2005, anyone can search the net for bearings with dimenssions: 25 x 42 x 9mm.
One normal bearing (made by KOYO, TIMKEN, SKF) should cost around 12 eur. And you need 2 pcs.

Last edited by expirmininkas; 01-30-2018 at 05:39 AM. Reason: Found additional information.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
GG FSE 450 crank shaft and other parts [rebuild] V1T0 Enduro Engine 4 stroke (including EFI & Exhaust) 8 10-27-2018 11:43 PM
Top end rebuild forgiven Enduro Engine - 2 stroke 9 12-05-2013 11:01 AM
05 rebuild brains Enduro Suspension 2 07-22-2008 08:54 AM
Rebuild steve Enduro Engine - 2 stroke 8 01-13-2008 03:06 PM




All times are GMT -5. The time now is 06:59 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org