|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Seat has wings that stick out???
Hi everyone,
I have a 2010 ec250 and the seat sticks out which my boots get stuck on.. We tried a 2011 seat on my bike and it doesn't stick out... The only difference is the person before I believe put a enduro engineering seat on it.. He doesn't know if it was the plastic or the foam only that the shop did it for him. I am assuming its the plastic too since it sticks out so darn far... does anyone else have this problem of the inverted triangle part ( AKA the wing ) sticking out ??? Its a serious concern as when I lift my leg the boot gets stuck there.. |
#2
|
||||
|
||||
Try heating up the seat base where the "wings" are and squeeze them together with a tie down wrapped around the seat.
Should be ok once it's cooled off. |
#3
|
||||
|
||||
I have the same bike and my seat does not do that, unless I misunderstand. Pull the seat off and look at the pan. That will tell you if it's foam like a Fisher or Seat Concepts seat or a wider pan as well.
Edit: Added a pic of my seat at the rear.
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 Last edited by Coop; 01-15-2014 at 11:17 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
pogo stick ride....hold on | Synergy-Seals | Enduro Suspension | 4 | 10-26-2011 06:46 PM |
Power valve did it stick? | mattdenn | Enduro Engine - 2 stroke | 11 | 04-27-2011 04:13 PM |
How to stick stickers back on and how to keep them there? | stay_upright | Enduro Chassis & Body | 5 | 08-13-2009 04:27 AM |
seat seems to stick out on the sides?? | jostby | General Discussions & Announcements | 3 | 06-26-2009 08:00 AM |