GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 10-07-2019, 12:27 AM
Homer Homer is offline
Member
 
Join Date: Feb 2014
Posts: 6
Default FSE400 Valve timing question.

A question for the 4 stroke brains trust. Would having the valve timing a tooth out on either the exhaust or more likely the intake cam, cause the engine to return a low compression test. Due to my manual being in Spanglish, the valve timing procedure is vague. I'm getting 65psi compression and bike won't start. Heads been done up and rings and piston were fine last time I rode it. Bike is a 2002 FSE400


Reply With Quote


  #2  
Old 10-07-2019, 12:40 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 250
Default

The auto de compressor on the exhaust cam will drop the compression figure considerably. But to answer your original question yes incorrect cam timing can make the compression appear lower than the actual specs. If you have access to one a leak down tester is a far more accurate way of measuring engine health and will pin point the exact point of compression loss.
__________________
Back on a gassy! 2018 EC300! 🤘
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
450 FSE timing/valve issues foxfire Enduro Engine 4 stroke (including EFI & Exhaust) 16 06-02-2015 06:37 AM
450 Fse Valve Train and Timing twowheels Enduro Engine 4 stroke (including EFI & Exhaust) 4 09-23-2010 06:36 AM
FSR 450 valve check and timing chain ggg Enduro Engine 4 stroke (including EFI & Exhaust) 0 04-22-2010 01:40 AM
fse 400 valve timing ??????? mcludd Enduro Engine 4 stroke (including EFI & Exhaust) 4 08-29-2009 11:54 AM
450 Cam Timing question Motarded1 Enduro Engine 4 stroke (including EFI & Exhaust) 4 04-09-2008 08:57 AM




All times are GMT -5. The time now is 08:18 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org