Parting out 2013 300

[BLD]

All sold, thanks!

I am parting out my 300. It was titled as an XC 300 in CA and here in AL it is titled as an EC. All e-start parts already sold. Prices do not include shipping and I am using UPS ground. Prefer Paypal for payment.

Lectron Carb (recently installed). - $old.

Scotts steering damper (complete kit, hardware is rough and bushings and sleeves on bar mount may need replacement. $200

Forks - Sold

Triple clamps & steering stem. (Lower bearing still on stem). $100

Ohlins rear (not pretty but no leaks). $old

Seat, with original pan, batt box, old foam and newer cover - $50

Front number plate with new headlight. $50

Rear tail/brake light. $20

CDI (JD CDI, see pic) - $100

Gas tank (with petcock & fairing screws) - $50

Kickstand assy - sold

Flywheel - $60

Front break assy (master, cable, calipers and pads, recently rebuilt). - $80

Rear brake assy (master, pedal, calipers and pads). - $80

Frame (Comes with Alabama title) - $100

Engine (needs rebuild, top end blew and piston cracked. Metal likely in crank case, needs new gaskets at minimum as leaked all coolant out on trail. Trans works and shifts, missing top end, ignition cover, clutch assy and power valve lever has been cut. See pics) - $old

Right Subframe, new never used, plastic not alum. $40

Wheels (as shown in pics. $old.

Swingarm (rough, lots of scratches & some gouges) $50

PM me with email or text number if you want any better pics or shipping estimates to your Zip code.