Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-17-2019, 10:06 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default Guide to programming a 2018 EC computer

I'm looking for a quick tutorial to set the specs (KPH to MPH, 24hr clock to 12 hour clock, etc).


Reply With Quote


  #2  
Old 01-19-2019, 11:52 AM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,838
Default

Hummmmm. The online manual says it is permanently set to KPH or MPH. Bummer.

From page 22 of the manual downloadable from Moto Center:

https://gasgaspartshouse.com/tech



When the motorcycle is started, the display panel is activated and remains on.
The dashboard will display the normal mode and will be on for 30 seconds if no speed pulse is generated.

If one or both buttons are pressed, the dashboard will display normal mode and will last 30 seconds if no button is pressed.

Speed
The speed or speed units are permanently displayed in km/h or mph with a range of 0 to 199 in both cases.

Odoometer
- To display the breaking-in time or km press sET < 2 seconds.
- To change units press SET > 10 seconds.
- To display the total press mode < 2 seconds
Route a - Route B - Total.
- To enter the clock mode press modE & SET > 2 seconds.
- To enter the wheel length mode press mode > 10 seconds.

Adjustment push-button

Clock format:
if the units are in km. ----> 24h. if the units are in mi. ----> 12h.
- To increase the hour digits press modE < 2 seconds.
- To increase the hour digits quickly press modE > 2 seconds.
- To increase the minute digits press sET < 2 seconds.
- To increase the minute digits quickly press sET > 2 seconds.
- To exit the clock mode and save the values press Mode & SET > 2 seconds.
- pressing no action > 10 seconds will exit without saving
changes.
route a and route b
- press modE < 2 seconds to display the dashboard.
- press sET < 2 seconds to display the breaking-in time or km. - press sET > 2 seconds to reset.

Configuration for Wheel Lenth
- To change the wheel from 2100 - 1811 press mode < 2 seconds.
- To exit the wheel length mode and save the value press modE & SET > 2 seconds.
-To exit automatically without saving changes, press no action > 10 seconds.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dash computer for 14 300? markwoodlief "Wanted to Buy" & "Want To Trade" 1 04-11-2016 03:26 PM
Checkmate xl programming svt2224 Enduro Other... 1 10-27-2008 09:28 AM
Watchdog computer ? Silver General Discussions & Announcements 0 09-15-2008 09:34 AM




All times are GMT -5. The time now is 06:48 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org