Can someone help me with a adding a headlight to a 99 EC300? Need electrical help.

[flatout111]

The person who had this bike before me "de-enduroed" the bike. I bought a Trailtech X2 fit all light but can't seem to find any wiring for the lighting. Possibly he/she completely gutted the electrical wiring but that would be weird.

Can anyone help me with what to look for and/or a diagram to get this wired up?

Thanks!

[wrench]

Originally Posted by flatout111

The person who had this bike before me "de-enduroed" the bike. I bought a Trailtech X2 fit all light but can't seem to find any wiring for the lighting. Possibly he/she completely gutted the electrical wiring but that would be weird.

Can anyone help me with what to look for and/or a diagram to get this wired up?

Thanks!

Use the "search" function at the top of the page. Search for wiring diagrams. You will find many threads and diagrams. You will be able to match your wiring to the diagram, pretty simple actually.

[flatout111]

So, most of the diagrams show 4 wires from stator. My 99 EC300 only has two that I can find. Does that mean this stator will not work for lighting?

Any help would be appreciated.

[gassergrant]

sending you a manual by email hope it helps ya mate, also try gas gas spain as they may have the correct one for your bike

[flatout111]

Thanks, bud. I'll give it a shot!!

[jhendr3702]

Originally Posted by flatout111

Thanks, bud. I'll give it a shot!!

i wonder if yours had the magnesium cover factory and the light coil that was in that cover ? (i have one of those i have never made work.....)

[egesledder]

This is how I wired up my '99. I went with a DC setup with a capacitor though because I was planning on going with an HID setup at some point.