GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Reviews

Enduro Product Reviews Feedback & Comments on Products Tested


Reply
 
Thread Tools Display Modes
  #1  
Old 07-23-2018, 02:23 AM
Gibnut Gibnut is offline
Member
 
Join Date: Jan 2018
Posts: 71
Default TSP head mod - 2018 EC250

After help from my buddy, Nate - a bike mechanic - I learned the slide was too high, giving a lean condition on closed throttle. After winding out the idle screw the bike is running perfectly.

Squish - 1.35mm. The bike is whisper quiet down low & so much smoother - it was already smooth as.

Clean, strong power all the way through, no spooge. Brilliant.

So happy this saga is over! Big thanks to Nate & Dave and Jason at TSP, Melbourne, Australia.


__________________
Gas Gas 2018 EC250 Six Days - sold

Last edited by Gibnut; 07-28-2018 at 08:23 PM.
Reply With Quote


  #2  
Old 07-28-2018, 08:24 PM
Gibnut Gibnut is offline
Member
 
Join Date: Jan 2018
Posts: 71
Default

Here?s the head.
Attached Images
File Type: jpg 2F43804F-9127-4AF1-A4C7-182CA7460743.jpg (76.7 KB, 73 views)
__________________
Gas Gas 2018 EC250 Six Days - sold
Reply With Quote
  #3  
Old 07-29-2018, 04:20 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,839
Default

Looking for a list of USA shops providing squish band service.
Reply With Quote
  #4  
Old 07-29-2018, 08:18 PM
KELS KELS is offline
Member
 
Join Date: Apr 2018
Posts: 5
Default

Quote:
Originally Posted by AZRickD View Post
Looking for a list of USA shops providing squish band service.
www.2strokeheads.com
Reply With Quote
  #5  
Old 07-30-2018, 12:26 AM
SS109's Avatar
SS109 SS109 is offline
Senior Member
 
Join Date: Jan 2011
Location: Tucson, AZ
Posts: 378
Default

Millennium.
__________________
Tucson Dirt Bike Trail Riders Meetup Group
AZ State Parks OHV Ambassador
'11 EC250R
'05 EC250 (stolen )
'98 KDX220
Reply With Quote
  #6  
Old 07-31-2018, 03:33 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,839
Default

Millenium http://www.mt-llc.com

Web site isn’t helpful. I sent an email.

info@mt-llc.com

Edit: I called and talked to a non-tech. Squish mod is $81. Waiting for details from the tech.

Millennium Technologies LLC
1404 Pilgrim Road, Plymouth WI 53073
phone: (920) 893-5595
fax: (920) 893-4830

Last edited by AZRickD; 07-31-2018 at 04:09 PM.
Reply With Quote
  #7  
Old 07-31-2018, 05:22 PM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 485
Default

Quote:
Originally Posted by AZRickD View Post
Millenium http://www.mt-llc.com

Web site isn?t helpful. I sent an email.

info@mt-llc.com

Edit: I called and talked to a non-tech. Squish mod is $81. Waiting for details from the tech.

Millennium Technologies LLC
1404 Pilgrim Road, Plymouth WI 53073
phone: (920) 893-5595
fax: (920) 893-4830
Let us know turnaround time, if they provide that information.
Reply With Quote
  #8  
Old 07-31-2018, 07:34 PM
memphis2857 memphis2857 is offline
Senior Member
 
Join Date: Aug 2011
Posts: 967
Default

I just put the RK Tek head on mine and it’s simply amazing. Bottom end is nuts and then it’s just a nice smooth pull all the way up through the RPM’s. Power was increased across the board. I dare say it is very “450ish”. If I had it to do over, I would just send my stock head to them and have it modified to accept one of their inserts. That service is only $125 vs $325 for the billet head like I have.


Sent from my iPhone using Tapatalk
Reply With Quote
  #9  
Old 07-31-2018, 10:18 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,182
Default

Very nice stuff!
__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black
Reply With Quote
  #10  
Old 07-31-2018, 11:10 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,839
Default

Is there anything wrong with just going for the $150 rechambering?

Why is this better than the Millenium service?

RK-Tek for Gas Gas:

https://www.2strokeheads.com/index.p...formance-heads

Quote:
Please CALL the Shop @ (208) 852 3221 to Discuss the Gas Gas Options


Quote:
GAS GAS 250 & 300 2 STROKE PERFORMANCE
NOTE: RK TEK IS 100% CONFIDENT IN THE PERFORMANCE OF THESE HEADS!

GAS GAS 250 and 300 CHEATER HEADS! (need to send in your OEM Head)

$225.00

__________________________________________________ ______________

GAS GAS 250 and 300 OEM Head Re-chambering (Note: this is a FULL Re-Design NOT just a milling. Need to send in your OEM Head)

$150.00

__________________________________________________ ______________

GAS GAS 250 and 300 BILLET HEADS (call)

$325.00
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 EC250 squish, jetting & pistons Gibnut Enduro Engine - 2 stroke 27 10-17-2018 08:15 AM
Gas Gas 2018 EC250 Six Days - 4th ride Gibnut Pictures & Videos 3 02-28-2018 12:07 PM
Gas Gas 2018 EC250 Six Days Gibnut Enduro Product Reviews 14 01-23-2018 12:00 AM
2018 EC250 - Wins first time out! rossi Off Road Racer's Corner 16 03-23-2017 02:34 PM
Three Year Head Start -- Parting out in 2018 AZRickD Parts 2 07-10-2015 09:49 AM




All times are GMT -5. The time now is 11:57 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org