|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
250 -300 conversion
Can anybody tell me if you can convert the 250 to 300 by changing jugs ?
i thought that was what i had read ,but I saw asomewhere that the stroke is different ???If thats so, than it wouldn't work properly,right?piston height and cylinder ports would be off.Does anybody know for a fact by having done or not been able to do it? Thanks Stoby |
#2
|
|||
|
|||
You can do it. Take a 250 bottom and put on a 300 top and run like the wind. Never done it but had planned to. As I understand it, jug, head, and piston.
|
#3
|
||||
|
||||
Heard
Thats the thing i've heard it can be done but who has done it .if the stroke is different the port timing would be off and more.
|
#4
|
||||
|
||||
Stroke is not different. Both 250 and 300 run a 72mm stroke, the 300 has a 72mm piston so is a square bore x stroke, the 250 has a 60 something mm stroke.
100% works |
#5
|
|||
|
|||
Go for it, totally bolt on affair.
|
#6
|
||||
|
||||
The PV parts swap right over to the 300 cyl too. Don't forget you will have to rejet.
|
#7
|
|||
|
|||
sorry that this is in german, but maybe it helps:
http://www.offroadracing-pilz.de/sho...uf-EC-300.html
__________________
4 strokes are only good for power generators |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
250 to 300 Conversion | Kurdt | Enduro Engine - 2 stroke | 10 | 03-30-2010 09:41 AM |
ec 125 conversion? | eddy field1 | Enduro Chassis & Body | 1 | 09-03-2009 09:00 PM |
07 200 to 05 conversion | brains | Enduro Engine - 2 stroke | 5 | 07-12-2009 12:54 AM |
MY FSE 450 to SM conversion | cal_tony | Pictures & Videos | 11 | 02-05-2009 10:11 AM |