Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-31-2011, 08:10 AM
mcnut's Avatar
mcnut mcnut is offline
Senior Member
 
Join Date: Aug 2010
Location: N. Manchester IN
Posts: 634
Default Fuel Mileage...EEEK!

I finally installed a Trail Tech Vector on the '11 250 6D, so this weekend I ran it out of gas a couple of times to see how far she'll go on an OEM tank. The answer is: not far enough!

First tank I made it 28.5 miles before I had to switch to reserve. With tank #2 I made it about 27 miles, but it was not filled to the brim. Looks like I need a bigger tank for enduros. I didn't feel like pushing the bike so I didn't run reserve clear out. I doubt you'll get more than 6 or 7 miles out of reserve. I ran about 5 miles on reserve and it was about an inch from going dry.

Now having said all that, I have not confirmed my son's programming of the Vector by checking it against a known distance. I'll do that before I go into a panic.

Regardless of the fuel mileage, I LOVE this bike!


Reply With Quote


  #2  
Old 01-31-2011, 08:31 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

Dang, we get just under 40 miles on the stock tank with our bikes (and I'm pushing 300lbs). Any chance your float level is a little high and sloshing fuel out the overflow tubes while you're riding? That was happening with my kids bike when we first got it and his mileage was about the same then as you are getting.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #3  
Old 01-31-2011, 08:49 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

You have a problem. All three of my 250s went at least 45 miles on a stock tank before reserve, even more going eaiser trail riding. Yes, check the float height first.
Reply With Quote
  #4  
Old 01-31-2011, 10:37 AM
widebear's Avatar
widebear widebear is offline
Banned
 
Join Date: Nov 2006
Location: Kamloops B.C.
Posts: 723
Default

I made some queries about the float height on the as2 carbs that the 010's ans 11's are now coming with. Even the pro's like JD and ES dont know. The best shot I've got is 6.5 to 9 mm. In the case of the newer carbs the old 16 mm at 65 degrees no longer stands true.
Reply With Quote
  #5  
Old 01-31-2011, 11:07 AM
webmaster's Avatar
webmaster webmaster is offline
Administrator
 
Join Date: Jul 2006
Location: Portland, Oregon, U.S.A.
Posts: 1,788
Default

In addition to what has been said, rb designs head work noticably improves efficiency and throttle response. Glenn had some numbers in tight stuff that I don't recall.

Jetting also helps and the stock jetting isn't doing the bike any favors.

For float height level has anyone called sudco?

Jeff
__________________
Reply With Quote
  #6  
Old 01-31-2011, 11:22 AM
widebear's Avatar
widebear widebear is offline
Banned
 
Join Date: Nov 2006
Location: Kamloops B.C.
Posts: 723
Default

They Sudco told me 16 mm, which is Impossably high! the point being they dont know either.
Reply With Quote
  #7  
Old 01-31-2011, 11:25 AM
lankydoug lankydoug is offline
Senior Member
 
Join Date: Jul 2010
Posts: 491
Default

If it pees on your foot when you tip it set the level lower in small increments until it doesn't.
Reply With Quote
  #8  
Old 01-31-2011, 11:34 AM
widebear's Avatar
widebear widebear is offline
Banned
 
Join Date: Nov 2006
Location: Kamloops B.C.
Posts: 723
Default

Right foot or left foot?
Reply With Quote
  #9  
Old 01-31-2011, 11:59 AM
mcnut's Avatar
mcnut mcnut is offline
Senior Member
 
Join Date: Aug 2010
Location: N. Manchester IN
Posts: 634
Default

It's not peeing on me and I'm not seeing or smelling gas. I'm betting it's an invalid calibration when my son set up the Vector. I'll put a helmet on and check what the odo says after I go down my driveway and back (.9mi.).
Reply With Quote
  #10  
Old 01-31-2011, 12:47 PM
lankydoug lankydoug is offline
Senior Member
 
Join Date: Jul 2010
Posts: 491
Default

Quote:
Originally Posted by widebear View Post
Right foot or left foot?
Put your right foot in
take your right foot out
put your right foot in and shake it all about
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
fuel/oil mix dareuk Enduro Engine - 2 stroke 16 05-09-2010 03:46 PM
Mileage PEB Enduro Intake/Carburetion - 2 stroke 17 08-26-2009 10:56 AM
Fuel and AV Gas kim Enduro Intake/Carburetion - 2 stroke 22 07-04-2008 11:06 PM
Fuel ? west aussie gas 450 Australia & New Zealand 9 07-01-2008 04:51 AM
Fuel range and fuel light sanderjavant Enduro Engine 4 stroke (including EFI & Exhaust) 6 01-05-2008 02:35 AM




All times are GMT -5. The time now is 12:36 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org