|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Post 77 and 78 of this thread. Someones even posted a video.
|
#2
|
||||
|
||||
My bike has all the updates other than a flywheel including a new starter. It still would not start on the button last fall until the motor was hot. Mind you it was 0 degrees C out side or colder. After a 4 month break I removed the right side number plate and noticed some white caulking on the fuse block connections. I dis-assembled and cleaned everything up and reassembled those connections with dielectric grease. Rolled it out in the drive way and it fired up with the button after all that sitting with no charging. Rode on Sunday and it was starting in gear and while out riding no problems at all. Had to kick it when I rolled it off the truck but the battery was cold from the hour drive at 2 degrees C. Time will tell I guess.
__________________
2018 EC 300 |
#3
|
||||
|
||||
Cheers.
__________________
'18 Gasgas XC250 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 Batteries and Starter Doesnt work! | markwoodlief | Enduro Electrical & Wiring | 81 | 11-30-2017 03:50 PM |
2018 Starter Delete | nhgas | Enduro Electrical & Wiring | 1 | 11-10-2017 07:58 PM |
45mm zoke continued | Mark Berg - CPD | Enduro Suspension | 0 | 04-05-2011 04:10 PM |