|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Air Filter Cross Over ?'s
So I was cleaning my filter when it decided to split in two... I am supposed to go riding this weekend and am trying to get the bike ready but ordering a gasgas specific filter will not be here in time...
Looking at the cross over list it states the following filters will work on our gasgas bikes Filters ‘92-’96 Honda CR250R ‘90-’97 KTM 250/300/360 ‘94-’96 Kawasaki KX ‘00-’01 Honda CR250R Do these all fit without modification? Do I need the corresponding filter cage for one of those types? Is one better than the other for my 04 ec 300? |
#2
|
|||
|
|||
Quote:
|
#3
|
||||
|
||||
__________________
2004 GasGas DE250 |
#4
|
||||
|
||||
Does this cross over list apply to '07 and newer bikes?
I notice the Twinair website has different part number '07 on
__________________
Barry 07 EC250 |
#5
|
||||
|
||||
The '07 and newer is different. I'd like to know the crossover too.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#6
|
|||
|
|||
i've got an 09 EC300 and i need some air filters too... i've seen some conflicting info on here and elsewhere in regards to what filters fit the 07 Gas gas and newer.. anyone with some actual twin air part numbers would be much apreicated... i'm in Australia, so sending stuff back and forwards if it doesn't fit is a pain..
cheers |
#7
|
||||
|
||||
Lookey here.......
http://www.gasgasrider.org/forum/showthread.php?t=1581 |
#8
|
|||
|
|||
I use twin-air cr 250 filters with no problem they use just one pin instead of 3 but shap is the same. You just have to make sure it seals good by feeling around but thats always a good idea. Moose should work also and uni but never tried.
__________________
Track-N-Trail Cycle LLC trackntrailcycle.com 2011 Beta 400 RR (sorry ) 2010 GAS GAS XC 300 2007 KTM 200 XC |
#9
|
||||
|
||||
Iv got >07 gg filters, <07 gg filters and a few CR filters.
They are all the same shape, only one of the filters has the 3 holes for the cage prongs, Im still on the fence about the holes, I find the filter gets less flexible the older it gets, and the holes tend to start tearing, however on the filters that dont have the holes, I just put grease around the mating face and make sure its seated correctly, no issues so far, just use a fresh filter every ride The gist, 2000 CR filter is fine |
#10
|
||||
|
||||
I can't help with an 04, but for 07+ 2t Gassers here is some info.
The TwinAir part number is 158046. I got one from here - not sure if he's got any more: http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT Stateside, Summit Racing claims to have some. See this: http://www.summitracing.com/parts/TW...n/?prefilter=1 Jason |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
pre-filter | 2stroker | Enduro Intake/Carburetion - 2 stroke | 6 | 04-26-2009 08:56 PM |
Air filter | anathema | Enduro Engine 4 stroke (including EFI & Exhaust) | 16 | 10-29-2008 07:54 PM |
Which air filter for 07 EC | Tom Zelko | General Discussions & Announcements | 9 | 06-29-2007 10:09 AM |
FSE Oil Filter | McGuiver | Enduro Engine 4 stroke (including EFI & Exhaust) | 5 | 05-15-2007 08:49 AM |
which air filter? | speed addic | Enduro Engine - 2 stroke | 9 | 04-16-2007 07:21 AM |