Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Announcements

Enduro Product Announcements Announce new gasgas enduro products here - Vendors Welcome...


Reply
 
Thread Tools Display Modes
  #1  
Old 10-23-2013, 03:02 PM
Appalachian Offroad Appalachian Offroad is offline
Member
 
Join Date: Feb 2012
Posts: 55
Default P3 Carbon Fiber

Not really a new product but we just wanted to get the word out that we have recently purchased P3 from Eric who will continue to make molds for us. We have our shop set up right here in WV with a few people working full time making parts to the same quality as when Eric made them. Check out our site, we are also looking for dealers who would like to sell our products.
http://p3carbon.com/

Thanks,
Jesse


__________________

www.gasserparts.com
Reply With Quote


  #2  
Old 10-23-2013, 03:31 PM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

Quote:
Originally Posted by Appalachian Offroad View Post
Not really a new product but we just wanted to get the word out that we have recently purchased P3 from Eric who will continue to make molds for us. We have our shop set up right here in WV with a few people working full time making parts to the same quality as when Eric made them. Check out our site, we are also looking for dealers who would like to sell our products.
http://p3carbon.com/

Thanks,
Jesse
That is you guys! I received an email about it being under a new name and new ownership. Congrats.
Reply With Quote
  #3  
Old 10-24-2013, 12:39 AM
Darrendeep6 Darrendeep6 is offline
Member
 
Join Date: Jun 2013
Posts: 72
Default

I wish you guys all the best with your endeavor. I would like to order some items but I have experienced some really long wait times in the past. There is a thread or two about them. Can you comment on what the current wait times are as I would like to order.
Reply With Quote
  #4  
Old 10-24-2013, 10:03 AM
Appalachian Offroad Appalachian Offroad is offline
Member
 
Join Date: Feb 2012
Posts: 55
Default

Quote:
Originally Posted by Darrendeep6 View Post
I wish you guys all the best with your endeavor. I would like to order some items but I have experienced some really long wait times in the past. There is a thread or two about them. Can you comment on what the current wait times are as I would like to order.
There should be little to no wait time on most everything. Some of the new stuff like Beta they may be backed up a little on because there aren't enough molds and making one piece ties a mold up for a day.

Let me know what you need it for and I'll find out for sure.

I think the big issue with Eric was he was a one man operation and was just overwhelmed with orders. We have a decent sized facility and can add more people and molds to keep up with demand, although our number one priority is keeping the quality P3 is known for.
__________________

www.gasserparts.com
Reply With Quote
  #5  
Old 10-24-2013, 10:10 AM
nambo-trev's Avatar
nambo-trev nambo-trev is offline
Senior Member
 
Join Date: Jun 2010
Location: alberta
Posts: 1,185
Default

That's good to here, the only reason I went with another guard last time was the wait time so I'll try yours next time around(which won't be long )
__________________
trevor
Reply With Quote
  #6  
Old 10-24-2013, 12:18 PM
Appalachian Offroad Appalachian Offroad is offline
Member
 
Join Date: Feb 2012
Posts: 55
Default

Just talked to them at the shop, all GasGas is in stock. KTM 250/300 are a day out. 350f is the only thing delayed, mainly because the molds for the new bikes with the resonance chamber were just finished.
__________________

www.gasserparts.com
Reply With Quote
  #7  
Old 10-24-2013, 08:05 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Good!!
You should have changed the name, though.
Buying a P3 (before) was like pulling teeth.
Reply With Quote
  #8  
Old 10-26-2013, 12:49 AM
Darrendeep6 Darrendeep6 is offline
Member
 
Join Date: Jun 2013
Posts: 72
Default

Quote:
Originally Posted by Appalachian Offroad View Post
Just talked to them at the shop, all GasGas is in stock. KTM 250/300 are a day out. 350f is the only thing delayed, mainly because the molds for the new bikes with the resonance chamber were just finished.

Awesome! Thank you.
Reply With Quote
  #9  
Old 10-30-2013, 01:01 PM
P3 Composites's Avatar
P3 Composites P3 Composites is offline
Member
 
Join Date: Oct 2013
Posts: 30
Default

Quote:
Originally Posted by gasgasman View Post
Good!!
You should have changed the name, though.
Buying a P3 (before) was like pulling teeth.
LOL ya, But the quality of the P3 Name stands above the rest.... We are making it easy to buy P3 now.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
12' Carbon fiber/kevlar pipe guard? desertgasser300 Enduro Engine - 2 stroke 1 10-14-2012 03:12 AM
Carbon Fiber Reeds Patswild300 Enduro Intake/Carburetion - 2 stroke 6 02-27-2008 12:37 PM




All times are GMT -5. The time now is 03:25 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org