#21
|
||||
|
||||
I like the stock seat foam, but thats JMO and every a$$ is different. I think when a seat is cut on the top with angles like the GG, harder foam is no problem. My '07 by comparison was a hard conventional shape and was tough, replaced that with softer '08 seat.
|
#22
|
||||
|
||||
Quote:
Made by MotoSeat Color is all Black and is one piece. My only modification was to put a small hole in the cover so that I can now install/remove seat from the top...... Yeah Baby !!! For install I recommend using an Air Stapler Gun. I got mine from Harbor Frt for $25 (good news is that the stapler did not break yet......)
__________________
2012 - XC 300 Racing Seattle, WA |
#23
|
||||
|
||||
seat cover
Quote:
|
#24
|
|||
|
|||
Nice work. It looks great. What size staples do you use?
|
#25
|
||||
|
||||
I mainly used both 5/16" and 1/4" staples. I am not a huge fan of Harbor Frt tools but I was surprised how well the stapler did work for this small project.
Originally I did try 1/4" staples in my hard hitting roof felt stapler and it was not cutting it for me. The air gun stapler put the staples in with no issues at all. On a side note if anyone is interested in converting the seat bolt connection from inside the fender to what I did I would be happy to share. It was super easy!!!
__________________
2012 - XC 300 Racing Seattle, WA |
#26
|
|||
|
|||
Tried to order from MotoSeat but they were not familiar with GasGas and did not know if they had a template available. I have a 13 EC300 and wish to replace the stock seat cover with the red over black nonskid cover that you show in your post. If you can facilitate this process please let me know what the next step would be. Thanks
|
#27
|
|||
|
|||
Quote:
|
#28
|
||||
|
||||
Quote:
This just in - the 2007-2011 seat cover template is complete. Let the ordering begin ...
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters |
#29
|
||||
|
||||
Quote:
Was there any change in design from 12 to 13 apart from the seat bolt , is it a little lower |
#30
|
||||
|
||||
I will get you some instructions and photos today.
__________________
2012 - XC 300 Racing Seattle, WA |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why do oversized PV covers do what they do? | motogroove | Enduro Engine - 2 stroke | 100 | 10-22-2014 10:43 PM |
Engine covers | Pepperami | Enduro Engine - 2 stroke | 4 | 05-25-2012 11:38 AM |
Powervale Covers | Bearman | Enduro Intake/Carburetion - 2 stroke | 4 | 10-06-2008 02:57 AM |
seat covers... | infected | Enduro Chassis & Body | 0 | 01-08-2008 08:46 AM |