off sticky ignition questions

[slocalspode]

MtnThpr: "ill put it back in just to see how smooth it really is!"
The difference is significant to say the least. Before you try
to install the balancer. Make sure you have all the parts. Mine
was missing the drive gear on the right side of the crank as
well as the balancer mechanism. And make SURE you align the
timing marks on the (drive and driven) gears off the right side
crank end. You will not be happy if you don't.
Cheers, Jeff So. Cal.

[GMP]

Don't attempt to weld anything to the flywheel, you will destroy it. You need the correct part. Post on the classifieds. Also, call GoFasters don't just go by the website. Call some dealers as well, you never know what they may have laying around. As far as a photo, there used to be some on the old Smackover site. I'm pretty sure my friend Cruiser's '97 has this ignition. Perhaps if you ask him nicely, he may take a picture when he has time.