#1
|
||||
|
||||
SOLD Full Part-Out 2010 300
UPDATED 8 16 16
Parting-out my 2010 300ec. I purchased the bike in Jan. 2011 as a Demo, bike had 5hrs on it when I purchased. Parting-it-out due to: I can't justify having four bikes and the Base Nut in one of the forks is nearly stripped. Per my Tuner the threads could catastrophically fail the next time someone is inside the fork. I won't sell a bike with a known major defect so parting-it-out. Hours: Total Time 182 hrs Top End 59 hrs (one rebuild at 123 hrs) I am in my 40's (where did the time go?) and a slow A rider. B rider speed with A rider technical abilities (I have a Trials background). I did ride one Family Enduro on this bike however I was following my Wife during the event and not competing myself, I think it is safe to claim "this bike was never raced". I ride almost entirely 2nd/3rd gear single track and typically in the low RPM's, not sure I've ever hit the rev limiter. All parts listed are from my 2010 300 unless followed with "09 200". I swapped a few parts from my 300 onto the 200. Parts from the 09' 200 have 47hrs on them. Prices are not including shipping. I am PayPal friendly. Happy to send pics of individual parts, I will insist on a couple of the parts to ensure both parties are satisfied with the transaction. Engine minus Stator and Flywheel (top end, bottom end, reeds) Able to provide video of the engine running just prior to part-out. $800 SOLD Pipe OEM. One very small dent-can send pics. The pipe was dented prior to my adding a P3 when I got the bike. $100 Sachs Shock. Sprung for 200lb rider weight. Valved for rocks/very soft. 0.5hrs since servicing. $100 Triple Clamps $75 SOLDFMF Turbine Core 09 200. Same part # stamped on the Silencer as my 300 $80 Wheels 09 200. $300. One dent to rear rim. OEM Plastics 09 200. In "ok" condition. Plastics are really good, OEM graphics pealing up in a couple spots. $70 SOLD Scorpion Rad Guards $75 SOLD- OEM Radiators. In good condition. Straight. Inner-most column slightly compressed. No leaks. Rads were compressed when it was a demo. $100 Front Brake complete with lever $150 SOLD Aluminum Skid Plate (gasgas) $40 Rear Brake complete with lever $150 Clutch complete, MC, Slave, Lever and Line $100 SOLD OEM Tank with Cap and Petcock. Some discoloration $75 Carb OEM. Jets, Needle, Cable not included $150 OEM Throttle Cable $15 Motion Pro +3" Throttle Cable $15 Subframe (metal portion only, no plastic/airbox etc) 09 200 $150 SOLD-Frame with Title $200. Had the kickstand/roller bracket re-welded when it cracked off in 2013. Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material $50 Front/Rear Axles $40 SOLD CDI $40 Airbox 09 200 $ 20 Seat, no tears/normal wear $50 SOLD Full Linkage-new bearings. $100 GPR Sub-Mount kit (including collar and post). Stabilizer not included $50 OEM Chain Guide $10 SOLD-MAP Switch $10 OEM Bar Mounts $10 Bucket of Bolts. 75% of the bolts, nuts, fasteners, etc. Basically all the bits left-over after the part-out $40 OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 SOLD OEM Wiring Harness $50 This will take a few extra days as I will have to remove the Sicass portions. SOLD Sachs Forks-Red with hard-mounted Motion Pro Bleeders. $ make an offer. Selling to be used for parts, not to be ridden. In fact I may disassemble prior to shipping. Sicass Dual-Sport Lighting Kit. I might consider selling this (also considering putting it on my 200).
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public Last edited by husley; 09-15-2016 at 11:58 AM. |
#2
|
|||
|
|||
parts
I will take the CDI and the harness, send your email for PayPal, thanks!
|
#3
|
|||
|
|||
Can you post a picture of the wheels?
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300 "If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut." ―Comedian Lewis Black "I think best when I have a wrench in my hands." Soichiro Honda "Dreams are messages from the deep." -Unknown Sardaukar |
#4
|
||||
|
||||
Any chance you'd be willing to sell just the gas cap? I don't need the whole tank.
Let me know. Thanks
__________________
2018 GasGas EnduroGP250 2018 GasGas TXT GP300 1994 Honda CR500 (Ice Racer) |
#5
|
||||
|
||||
LOL, I can try. Might be easier to email or text pics directly J
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#6
|
||||
|
||||
Quote:
Probably not. Sorry. J
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#7
|
||||
|
||||
Quote:
To ensure we are on the same page: what do you consider to be the harness? Thanks! J
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public |
#8
|
||||
|
||||
Forks
What's going on with the forks that they are "not to be ridden"?
__________________
Believe nothing, no matter where you read it or who has said it, not even if I have said it, unless it agrees with your own reason and your own common sense. [Buddha] |
#9
|
|||
|
|||
He explains that towards the top of his post
|
#10
|
|||
|
|||
harness
The harness should begin at the point of the connection from the stator out to the point of connection of components such as the coil, kill button, etc. minus your dual sport additions.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2010 Partial Part Out - Seeking interest | Jakobi | Parts | 18 | 03-29-2016 09:15 PM |
Full auto | Clay | General Discussions & Announcements | 38 | 11-21-2012 09:07 AM |
GG 300 Race with full TTX | GasTimppa | Enduro Suspension | 21 | 05-21-2012 12:59 AM |
Air box full of oil | dukbil | Enduro Engine 4 stroke (including EFI & Exhaust) | 10 | 04-02-2009 08:46 PM |
Full throttle? | Krasi | Riding Techniques & Training | 8 | 01-29-2009 01:15 AM |