Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-25-2020, 09:46 PM
jarret440 jarret440 is offline
Member
 
Join Date: Mar 2019
Posts: 8
Question 2014 EC300 Will Not start

hey guys i have an electrical issue with my 300.

It appears to have decent spark but will not start. I have checked all my grounds and have the bike wired to run with out the headlight and start with kick only.
I bought this bike sight unseen at and auction and it was a complete mess. i never heard it run and i dont know anything about it.
-It does have good compression
-a new kehin carburetor from a ktm 300
-good plug
-good coil(tested)
*however, the stator has 4 wires. there's 2 brown wires. which to me is stupid
when i check resistance from a yellow and dark brown i get .9 ohms. which to me is ok. when i check the other wires i get nothing.
please let me know if you guys have any ideas.
Reply With Quote
 




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB 2014 XC300r E-start Zip1244 "Wanted to Buy" & "Want To Trade" 0 01-13-2020 06:28 PM
2014 gas electric start parts jarret440 Parts 0 07-11-2019 05:33 PM
Gasgas EC300 E-Start 2014 Coil Problem periclesgsilva Enduro Electrical & Wiring 3 05-23-2019 06:16 AM
2014 XC300 CDI ? E start CDI different ? Jason noble Enduro Electrical & Wiring 4 11-15-2017 09:57 PM
Removal of e-start from 2014 XC300 CombatYoga Enduro Electrical & Wiring 13 08-17-2016 05:53 PM




All times are GMT -5. The time now is 04:57 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org