|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
KYB swap which triple clamp?
Just took delivery of some 2010 yz250 KYB SSS. Measuring them compared to my gasgas,
Ec300 Top 54mm Bottom 57mm KYB SSS Top 56mm Bottom 59mm So which triple clamps are people using for these? Looks to me like they each need 2mm from top and bottom... I know the yz clamps can fit with new bearings, but what gasgas triples are best?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#2
|
||||
|
||||
I had my GG clamps machined, that way I can use the stock fender, headlight mounts and steering stop.
|
#3
|
||||
|
||||
The YZ ones look a little mass produced but work well with blocks for stops welded to them. I painted black. Front guard I just redrilled. Headlight, well it just straps on on my 7.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#4
|
|||
|
|||
I've ordered 2009 which are a little prettier. Do you know what size/part number bearings to order?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#5
|
|||
|
|||
So you had 2mm machine from each? Aren't they a bit thin?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#6
|
||||
|
||||
So far after a couple years I've had no problems, Have another set of GG clamps and a set of Yamaha clamps if I do.
|
#7
|
||||
|
||||
Ahh, yz top had a smaller od so I used that. Heck i had a thread but search on my tablet hasn't found it, have a look and it should cover it and what I fit for spacers and stops etc
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#8
|
|||
|
|||
I've had a look on all 16 threads you've started and nothing there, will search deeper!
Edit - found, you openly admitted to hijacking the thread! http://www.gasgasrider.org/forum/sho...earings&page=7
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#9
|
|||
|
|||
I use the original gasgas tripple clamps. I machined the clamping diameter and it works fine since about 200 hours. I am doing not only woods ridding, I am also on the motocross track with my gasser
Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators |
#10
|
|||
|
|||
Quote:
2010 forks fit 2009 yokes anyway. I read somewhere that they'd changed the upper diameter on the forks but haven't found the problem..
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Scotts Triple Clamp Part # 6043-12 & steering stabilizer handlebar clamp | jeffp | Parts | 0 | 12-31-2015 07:07 PM |
triple clamp | mike989 | Parts | 0 | 06-02-2015 12:04 PM |
Which yamaha triple clamps for KYB swap | roverhybrids | Enduro Suspension | 14 | 07-27-2013 12:48 PM |
Triple clamp ?? | rippn450 | Enduro Suspension | 22 | 04-18-2011 09:21 PM |
Can I swap Triple clamps and front forks? | FFRDave | Enduro Chassis & Body | 2 | 05-24-2010 02:32 PM |