Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 11-07-2013, 02:55 AM
Vinny's Avatar
Vinny Vinny is offline
Senior Member
 
Join Date: Dec 2010
Location: Austin, Tx
Posts: 109
Default GG 450 high idle

Bike runs great, just idles too high. On steep downhills its actually accelerating on 1st gear.
Any ideas on how to lower the idle a little bit ?

Its an '05 GG 450 FSE.

Thanks.


__________________
Vinny
Austin , Tx
A wonderfully working and hard riding '05 GG 450.
Reply With Quote


  #2  
Old 11-07-2013, 04:11 AM
Marco Marco is offline
Member
 
Join Date: Aug 2007
Location: Shepparton, Vic,Australia
Posts: 25
Default

Quote:
Originally Posted by Vinny View Post
Bike runs great, just idles too high. On steep downhills its actually accelerating on 1st gear.
Any ideas on how to lower the idle a little bit ?

Its an '05 GG 450 FSE.

Thanks.
If it ran OK to start with I would check your cable is not caught up somewhere or slightly frayed at one end and getting snagged internally on the cable cover
. It can get caught in a number of places particularly if you have had the tank off. Check that it is properly seated at both ends.

Not sure you can adjust idle manually. I never did on mine but someone else may correct me.
Reply With Quote
  #3  
Old 11-07-2013, 05:24 AM
Vinny's Avatar
Vinny Vinny is offline
Senior Member
 
Join Date: Dec 2010
Location: Austin, Tx
Posts: 109
Default

Thanks for the quick response. I had that problem when I added an inch to the handlebar. I took it off.
I'm looking for a way to adjust the idle. I tried the computer diagnostic tool a while back, it didn't help.
__________________
Vinny
Austin , Tx
A wonderfully working and hard riding '05 GG 450.
Reply With Quote
  #4  
Old 03-14-2014, 09:14 PM
Nick's Avatar
Nick Nick is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Nevada
Posts: 560
Default

There is an adjustment on the throttle body that is accessed from the back of it.
__________________
Dont follow me, You wont make it.
Reply With Quote
  #5  
Old 03-24-2014, 06:00 AM
Vinny's Avatar
Vinny Vinny is offline
Senior Member
 
Join Date: Dec 2010
Location: Austin, Tx
Posts: 109
Default I'll look into it

I haven't seen a screw back there. While I'm checking the valves I'll take the cover off and look for the screw.
Thanks. I hope it's there.
__________________
Vinny
Austin , Tx
A wonderfully working and hard riding '05 GG 450.
Reply With Quote
  #6  
Old 06-12-2014, 04:39 AM
Vinny's Avatar
Vinny Vinny is offline
Senior Member
 
Join Date: Dec 2010
Location: Austin, Tx
Posts: 109
Default

Found what I think might be the screw. No change when I move it. Might be wrong screw.
Picture available ???
__________________
Vinny
Austin , Tx
A wonderfully working and hard riding '05 GG 450.
Reply With Quote
  #7  
Old 06-12-2014, 10:32 PM
Why Z? Why Z? is offline
Member
 
Join Date: May 2014
Posts: 54
Default

I am no expert, but have you checked for air leaks at all?

Just thought I would suggest it before you go through the trouble of tearing down the bike.

I just thought it could be possible that you have air leak in the intake somewhere, I suspect a similar problem (w slightly different symptoms from you) bt a lot of what I have read sounds kinda like what you are describing.

To test it spray anywhere with short bursts of crab cleaner, starter fluid or something flammable where there could be a leak.

Or I could be totally wrong guys so if I am telling him to do something dumb go head and call me out on it n tell me why!
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
High bar question lgr Enduro Chassis & Body 15 08-26-2013 07:30 PM
Idle REALLY high after carb / PV clean SingleTrackMind Enduro Intake/Carburetion - 2 stroke 8 07-22-2013 09:58 AM
ec 300 2005 won't rev high nor idle... hannesd Enduro Engine - 2 stroke 23 12-17-2012 01:52 AM
Way high in the cascades PEB Pictures & Videos 16 09-16-2011 06:38 PM
Very high idle problem rupecopp Enduro Engine - 2 stroke 5 10-22-2007 05:51 AM




All times are GMT -5. The time now is 02:29 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org