Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 09-11-2016, 11:14 AM
husley's Avatar
husley husley is offline
Bronze Level Site Supporter
 
Join Date: Jan 2010
Location: Western US
Posts: 536
Default Part-Out 2010 300 and 2009 200 SOLD

UPDATED 9 18 16

All prices do not include shipping. I think (and hope) that my prices are reasonable. I don't want to make a fortune off this stuff, just a fair deal for both parties......and I want it out of my garage


2009 200 50hrs on the bike. Parting-it-out due to the motor attempting to commit suicide.

Send me a PM or Email (preferably with the part you are interested in and your phone # ) and I'll gladly text pics. Texting is simplest for me.

Engine minus Stator (top end, bottom end, reeds) AS IS Piston and Cylinder damage-not sure what happened. Besides a lack of low-end the bike ran fine, I happened to find the cracked piston when I decided to measure/adjust squish. Engine was actually running fine, have GoPro video of the last ride.. (09' 200)
$400

Pipe OEM. One small dent (09' 200)
$100

P3 Pipe Guard 200/250/300
$75


Oversized PV Cover- this is the one machined by the guy on this forum. It is two separate spacers, uses OEM Cap.
$40



Sachs Shock. (09' 200) Sprung for 200lb rider weight. Valved for rocks/very soft. 09' 200
$150

Triple Clamps. Top Clamp is the GPR Stabilizer Mount Clamp Includes Collar/Pin $150. (09'200)

Triple Clamps OEM (10' 300)
$70



Wheels (front and rear) 09 200. $300. One small dent to rear rim.
Wheels (front and rear) 10' 300 $300


10' Plastics (not including actual/glass headlight). White. Custom Graphics
$50
09' Plastics OEM.
$50

Scorpion Rad Guards (09' 200) $75

OEM Radiators. (09 200')
$150

Plastic Frame Guards (just above pegs) 10' 300 + 09' 200
$5 each

Front Brake complete with lever (09' 200) $150

Aluminum Skid Plate $40 (09' 200)

Rear Brake complete with lever (09' 200) $150

Clutch complete, MC, Slave, Lever and Line
$100 (10'300)

Clutch complete, MC, Slave, Lever and Line
$100 (09' 200)

OEM Tank with Cap and Petcock. (09' 200)
$50

Carb OEM. Jets, Needle, Motion Pro +3" and Throttle included $150 (10' 300)

Carb OEM. Jets, Needle, Cable and Throttle included $140 (09' 200)



Subframe (metal portion only, no plastic/airbox etc) 10 300 $150

Frame with Title $200 (09' 200)

Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material. Bearings and Seals are new $50 (10' 300)





Airbox $ 20 (10'300)


Full Linkage $100 (09' 200)

GPR Sub-Mount kit (including collar and post). Stabilizer not included. (10' 300). Also have smaller I.D. Collar. Fits many years
$50

TwinAir Air Filters (2) -used but life left in them $5 each



OEM Chain Guide $5 (09 200')


OEM Bar Mounts $10


Rad/Engine hoses $5

Bucket of Bolts. 75% of the bolts, nuts, fasteners, etc. Basically all the bits left-over after the part-out
$40

Rear Brake Lever (09' 200)
$40

Kickstand
$50

OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 (black, 10' 300)

Wiring Harness with Stator $250 (09' 200)

Sicass Dual-Sport Lighting Kit. Headlight (bulb) included. LED rear turn signals, LED front hand guard turn signals.
$200

New Rear Pads EBC $ 10 ?

Front Brake and Clutch Levers (worked on my 09 and 10)
$15


__________________
2015 KTM 450 XCW
2014 350 XCF Wife's
2009 200 ec. Loving it
2007 Beta Rev 3 270
2007 KTM 200 XC Wife's


Public Lands belong to the Public

Last edited by husley; 07-31-2017 at 01:00 AM.
Reply With Quote


  #2  
Old 09-11-2016, 11:59 AM
Zrt1200 Zrt1200 is offline
Senior Member
 
Join Date: Mar 2016
Location: Mid Michigan
Posts: 199
Default

Can you post a couple of pics of the bike's being parted out.
Reply With Quote
  #3  
Old 09-12-2016, 04:39 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

Let me know what you want for the kick starter for the 200.

Thanks
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #4  
Old 09-12-2016, 04:52 PM
husley's Avatar
husley husley is offline
Bronze Level Site Supporter
 
Join Date: Jan 2010
Location: Western US
Posts: 536
Default

Quote:
Originally Posted by Rick View Post
Let me know what you want for the kick starter for the 200.

Thanks

Rick, the motor might be sold. Let me see what his expectations are for the kick starter. If he doesn't want it, how about $30 + shipping?

J
__________________
2015 KTM 450 XCW
2014 350 XCF Wife's
2009 200 ec. Loving it
2007 Beta Rev 3 270
2007 KTM 200 XC Wife's


Public Lands belong to the Public
Reply With Quote
  #5  
Old 09-12-2016, 07:04 PM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 707
Default

I will take

OEM Throttle Cable $10
OEM Chain Guide $5 (09 200')

Do you have pegs ?
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #6  
Old 09-12-2016, 07:17 PM
husley's Avatar
husley husley is offline
Bronze Level Site Supporter
 
Join Date: Jan 2010
Location: Western US
Posts: 536
Default

Quote:
Originally Posted by cbutler View Post
I will take

OEM Throttle Cable $10
OEM Chain Guide $5 (09 200')

Do you have pegs ?
Ooh, yes. Thanks for the reminder. I have 10' pegs with the bracket cut (to facilitate lowering them) and I have non-altered OEM pegs from the 09' 200.
$30 for either set of pegs

You PayPal friendly? PayPal address: husley7374@aol.com + $10 for shipping 👍
__________________
2015 KTM 450 XCW
2014 350 XCF Wife's
2009 200 ec. Loving it
2007 Beta Rev 3 270
2007 KTM 200 XC Wife's


Public Lands belong to the Public
Reply With Quote
  #7  
Old 09-12-2016, 07:25 PM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 707
Default

Quote:
Originally Posted by husley View Post
Ooh, yes. Thanks for the reminder. I have 10' pegs with the bracket cut (to facilitate lowering them) and I have non-altered OEM pegs from the 09' 200.
$30 for either set of pegs

You PayPal friendly? PayPal address: husley7374@aol.com + $10 for shipping ��
non-altered OEM pegs from the 09' 200.

$55 coming your way

how about the rubber strap at the back of the tank
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #8  
Old 09-12-2016, 07:28 PM
husley's Avatar
husley husley is offline
Bronze Level Site Supporter
 
Join Date: Jan 2010
Location: Western US
Posts: 536
Default

Quote:
Originally Posted by cbutler View Post
non-altered OEM pegs from the 09' 200.

$55 coming your way

how about the rubber strap at the back of the tank
I'll include it in the box ...maybe add a note in PayPal to remind me

J
__________________
2015 KTM 450 XCW
2014 350 XCF Wife's
2009 200 ec. Loving it
2007 Beta Rev 3 270
2007 KTM 200 XC Wife's


Public Lands belong to the Public
Reply With Quote
  #9  
Old 09-12-2016, 08:00 PM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 707
Default

Quote:
Originally Posted by husley View Post
I'll include it in the box ...maybe add a note in PayPal to remind me

J
Sent thank you
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #10  
Old 09-12-2016, 08:37 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

Quote:
Originally Posted by husley View Post
Rick, the motor might be sold. Let me see what his expectations are for the kick starter. If he doesn't want it, how about $30 + shipping?

J
The price is right....keep me posted.....
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Full Part-Out 2010 300 husley Parts 57 02-13-2018 11:15 AM
2010 Partial Part Out - Seeking interest Jakobi Parts 18 03-29-2016 09:15 PM
2009 gfx on 2010 plastics Philcom2000 Enduro Chassis & Body 0 04-20-2011 12:11 PM




All times are GMT -5. The time now is 04:05 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org