|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Front wheel question
Can an older front wheel from a WP fork (20mm axel) bike (pre '04) be used on a newer Zoke (25mm axel) ('04+) bike with a bearing/spacer/seal change? I know the hub part#s are different, but the bearings have the same ODs although a different width. I'm thinking perhaps the inner spacer tube is a different length as well. Maybe the hub includes this, hence the different part #. Any thoughts or experience? I could knock apart an older wheel myself and measure but would rather avoid it as its all good parts on another bike.
|
#2
|
||||
|
||||
Hi Glenn,
Ping Roostafish (mike sheetz). He has a set of older u-rim wheels (2001) on his 2008 gasgas 250. Jeff
__________________
|
#3
|
||||
|
||||
Thats exactly what I want to do, use the stronger "U" rims, already have a rear. Thanks Jeff.
|
#4
|
||||
|
||||
Yes, for all interested in doing this. The older hubs are identical to the newest ones in dimension. Spacers, bearings, center tube are the only differences, so it's an easy swap.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front wheel ? | Silver | Enduro Chassis & Body | 2 | 04-20-2009 05:33 PM |
Will anything other than a GG front wheel fit a GG? | cal_tony | Enduro Chassis & Body | 7 | 11-08-2008 09:21 AM |
front wheel bearings | pizzaman | Enduro Other... | 4 | 10-31-2007 07:50 PM |