|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Need help on 99 EC200
I dont think the spacer I have is right. I bought this bike and after a finding the previous owner drilled the top triple clamp uneven I am wondering about other stuff that doesnt seem right.
I took several pics. I got a new front end from Rick and it is a little different. He wasnt sure if his spacer was the right one. Here is what I have The spacer I thought should set into the fork tube. The left side of the red line fits in there but comes out when the axleis pushed in tight and nut is snug. You can see above the black line the axle comes out the end of the fork tube into the space where I think the spacer should be. in the above pic is the spacer from Rick. It fits like I think it should but is a little too wide where the one on the bike I think is too small. With Rick's spacer the wheel looks like it sits to the right of center. With the forks just hanging loose installing Ricks spacer I have to spread the forks apart an 1/8 in. |
#2
|
||||
|
||||
the other side
|
#3
|
||||
|
||||
Or did I have the wrong spacer on that side. It looks like maybe it shouldnt go into the fork. Im trying this one now.
|
#4
|
||||
|
||||
Is this right?
|
#5
|
|||
|
|||
Does this have the conventional zook forks? If so, I will dig out my old front wheel and have a look at the axle and spacers for ya.
|
#6
|
||||
|
||||
Yes, thanks
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gas Gas EC200 01' CDI Box | Lil'Lou | General Discussions & Announcements | 4 | 11-16-2011 02:38 PM |
99 EC200 for my dad | sled_fiend | General Discussions & Announcements | 5 | 07-09-2009 09:36 PM |
New Guy with an EC200 | sammyj18 | General Discussions & Announcements | 5 | 02-12-2008 08:12 PM |