|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
09-08-2010, 01:32 PM
|
||||
|
||||
kick stand question....
anyone ever put and 07 and up kickstand/bracket on an older bike like my 01 300 ? the angle of the later kickstand looks more stable than mine.. i am always concerned leaving mine on the kickstand.. it just looks like it is gonna fall at any moment...
just wondering.. jay
__________________
broken down over 60 slow rider.. 
|
|
#2
09-08-2010, 01:41 PM
|
||||
|
||||
|
if you pick one up cheap then u can always modify it to fit. if ur just thinking about how the leg sits maybe they will bolt into the old bracket?
__________________
03 ec250 hyde skidplate, cycra handguads, protaper contours "what? it seemed like a good idea at the time!"
|
|
#3
09-08-2010, 02:19 PM
|
||||
|
||||
|
dont know... have just been looking at bikes and the newer kickstands and mounts look different...
iirc the cast kickstand on the 2000 i had was more stable also... mine may be bent wierd also.. when it is up it is on the outside of the rear number plate, so i know that is wrong....
__________________
broken down over 60 slow rider..
|
|
#4
09-08-2010, 02:28 PM
|
||||
|
||||
|
looking at this...2001
 versus this...2009 
__________________
broken down over 60 slow rider..
|
|
#5
09-08-2010, 03:40 PM
|
||||
|
||||
|
Just to add some info that you may already know. I had a guy comment that my (06) kickstand which looks/angled like yours had a different mount that his 02 had.
__________________
2006 Gas Gas EC250 2011 Husaberg FE390
|
|
#6
09-08-2010, 04:16 PM
|
||||
|
||||
|
Quote:
need to look at it... something on mine is not exactly correct... just not sure what..
__________________
broken down over 60 slow rider..
|
|
#7
09-13-2010, 03:33 PM
|
|||
|
|||
|
I bought a used one from a forum member for my 07. The bracket looks like the one pictured on the 09 but the actual stand part looks like yours. The bracket bolted right on and it folded up behind my # plate but hit the airbox pretty hard, and was afraid it may crack it. So i mabe a little bumper and put it on the airbox where it was making contact. Worked great right up untill the single spring broke. I have since purchased the double spring as seen in the pic of the 09, but have not remounted it.
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| LOOKING FOR: Kick Stand - 2004 FSE 450 | adpartain | Enduro Chassis & Body | 0 | 05-23-2010 09:36 PM |
| 2004 FSE 450 Kick Stand Fix | MTNBK | Western United States | 3 | 07-01-2009 03:09 PM |
Linear Mode
