Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2016, 12:14 PM
ben ben is offline
Member
 
Join Date: Jan 2016
Location: Montana
Posts: 13
Default Marzocchi 48 - Bleeder Valve/Stock Screw

Sending my suspension in and they want screws instead of bleeders installed so there arent any leeking issues during shipment. Anyone know what the stock length, diameter, pitch, etc is? I can take in the bleeder valve to the hardware store to get an idea of the width and thread pitch but not sure of the length.

Came off a 2012 XC 200r.

Thanks.


Reply With Quote


  #2  
Old 02-11-2016, 03:08 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

Not more than a 1/4''in length. thread 0.8
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending

Last edited by john r b; 02-11-2016 at 03:25 PM. Reason: addition
Reply With Quote
  #3  
Old 02-12-2016, 03:43 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

On my 15 the screws are M4x6

Sent fra min GT-I9295 via Tapatalk
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Marzocchi Shiver 45 lower valve parts? brider Enduro Suspension 4 04-13-2015 06:16 PM
Marzocchi 48mm CC Compression valve removal Jakobi Enduro Suspension 12 03-04-2014 08:19 PM
Compression valve(nut) on the bottom of a marzocchi 45? wence Enduro Suspension 16 02-16-2012 12:49 PM
Base valve pistons Marzocchi Shiver 45 Klausen Enduro Suspension 4 03-30-2010 06:05 AM
Marzocchi 45 stock shims vavido Enduro Suspension 2 05-28-2008 04:31 PM




All times are GMT -5. The time now is 07:20 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org