|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
06-29-2019, 05:33 AM
|
||||
|
||||
Rear master cylinder sleeve
Ok so my 2007 I replaced the front MC with great results. They are only ally and get a hard time on the dirt.
The rear I've tried to find replacement to no avail. They are different bore and mounting to most other bikes. Took it apart and could see where the bore was not smooth. Local place offered brake sleeving for cars with stainless sleeve. They would do mine . When they got it it was a bit tricky due to remote reservoir and ball bearings blocking off side drillings. Got there in the end. Bled it in 10 seconds. Really. Wrapt.
__________________
'07 EC300 496 CPI Cheetah RZ/RGV hybrid 675 Street Triple R RS125 framed MB100 racer Stinger T125 Suzuki 
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rear Brake Master Cylinder Kit | Jakobi | Enduro Chassis & Body | 2 | 08-30-2018 04:48 PM |
| Rear master cylinder problems... | MACROMOLECULE | Enduro Chassis & Body | 10 | 08-07-2017 11:52 AM |
| In need of a new rear master cylinder | CombatYoga | Enduro Chassis & Body | 5 | 05-20-2016 04:58 AM |
| rear master cylinder rebuild. | imsimon | Enduro Chassis & Body | 2 | 04-19-2016 02:21 PM |
| EC 300 rear master cylinder 2010 | ggmike300 | Enduro Chassis & Body | 2 | 10-16-2014 06:38 PM |
Linear Mode
