Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-16-2017, 08:49 AM
risk74 risk74 is offline
Senior Member
 
Join Date: Jun 2016
Posts: 240
Default Airbox Boot Sealant

Replacing the rubber boot on the airbox on my 04 EC300 due to hardening. The factory uses some sort of really tough sealant on the joint between the boot, the airbox and the metal air filter frame, appears to be some type of silicone, but much tougher. Any recommendations on what to use? Regular silicone isn't going to cut it. Thanks.


Reply With Quote


  #2  
Old 10-16-2017, 02:58 PM
Nocams Nocams is offline
Member
 
Join Date: Feb 2016
Posts: 83
Default

Sikaflex 227 would be my choice.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ride On or Slime tire sealant 1RobAusdemore General Discussions & Announcements 10 07-14-2014 03:32 PM
gasket sealant savage sausage General Discussions & Announcements 5 03-20-2014 12:57 PM
04 airbox intake boot papagasgas Parts 0 12-27-2013 01:04 PM
Trelleborg t lock sealant Diggs345 Enduro Chassis & Body 18 01-17-2013 03:14 AM
2001 xc250 case sealant with no gasket 70455 Enduro Engine - 2 stroke 2 11-26-2012 08:05 AM




All times are GMT -5. The time now is 01:19 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org