Has Anyone got a nice solution to stop the top of the Ohlins shock wearing

[stay_upright]

The top of the shock gets worn away from your leg/boot whatever, has anyone got a neat solution of something to put over there to stop the shock getting worn?

[Cruiser]

Somebody made a quicky plastic guard for one from a lid to a spray can a while ago,, I've also seen CF ones for other bikes,, would be nice to see one for this too..
Steve

[eff]

I made one with the spray paint lid. Someone else came up with it.

Easy to do. Cut it in half and then carve out top leaving a lip. Drill two holes in each side and use a zip tie around the shock reservior to hold it.

[gasser]

A stainless steel hose clamp at the top and bottom look real good and will stop most wear.

[stay_upright]

My bike came with a spray can top but looked pretty auwful. I will investigate the SS clamp.

[bergerhag]

three large zip-ties.

[coza]

A good square of thick stick on (clear) vinyl wrapped around it

[2 strokes 4 life]

Cut a redbull can and splice the back and zip-tye it on. Also works for your top fork tubes in the tree. You may also use and other pop or beer can out there.

[stay_upright]

Any pics I think I've seen beer cans used before and they look good - a red bull blue may match the color of the bike. Only problem is I hope I don't have to drink the stuff!

[2 strokes 4 life]

I do not have a pic. Sorry. I have only seen it done. I am thinking pf doing it myself when my bike is blue.